Originally Posted by
mrto
Hi Danny,
I have indeed installed an Original Model 50 piston seal into a Falke 80 it is a perfect fit.In fact, from memory it is virtually identical to the original Falke one it replaced.
I used a cut down Titan spring the number of which I forget,It's still a bit fierce and is a work in progress.
Be aware,at the head of the piston you may encounter a transverse pin that holds the piston seal screw and piston rod in place, from memory this sits in a blind hole and has to be drilled out and then replaced to at least re secure the piston rod.
Regards,
Mark.