Results 1 to 6 of 6

Thread: Valuation help with some classic pcps please

  1. #1
    Join Date
    May 2001
    Location
    Bowers-Gifford, Essex
    Posts
    3,074

    Valuation help with some classic pcps please

    Please help me on this one, I do not frequent this section too much but need to sell some classic rifles to put some money back in the bank!!

    first up is a Daystate Midas, the original one with brass air cylinder, comes in a nice walnut target style stock, cant be too many of these around. Condition wise id ive it 85%

    Second one is an Air arms Shamal, this one has the cast breech block on it, it is a really nice gun, comes in a beech semi target style stock, these were air arms top flight gun of the time, build quality was far superior then! Condition wise 75%

    Third one is a Titan Manitou MT010 , apparently these are like rocking horse poo!! this one is in a walnut stock, this was titans original ft gun, it is actually very light and could suit someone who struggles with a heavy rifle. Its condition can be described as completely original, the bluing was never brilliant on these guns and is a bit plumby but this is how it came out of the factory. Id say 90% on this one.

    So basically there is 3 classic ft guns here, all from the 80s and from the 3 main manufacturers.

    Any help would be appreciated

    THanks

    Stuart
    Last edited by Whizzer; 26-05-2009 at 04:16 PM.
    Click below for my super guns!!

    My Rifles

  2. #2
    Join Date
    Feb 2009
    Location
    aldershot
    Posts
    78

    help

    not much help for me or you here

    Terry
    Daystate MK 3 in Paul Wilson stock
    aa400k, Theoben grand prix, aa200 mk 3
    LP 2, FAS 604, TAU 7, HW 40

  3. #3
    Join Date
    Feb 2006
    Location
    Farnborough
    Posts
    4,402

    Evening....

    ....I seem to recall a review of just such a Daystate midas in one of the mags within the last couple of years. iirc the reviewer suggested a notional value of £300+ which seemed optimistic to me. For me even with a walnut T stock I would suggest a £250 ceiling, perhaps a litle less depending on what 85% condition denotes. Having said that as with anything if you find more than one person who wants it quite badly who knows what you might get???
    Hope this is of some use even if only to get you to hunt down the mag it was in.
    PS Someone else may be able to direct you to the Dayatste owners website.
    ATB Rich.
    WANTED: Next weeks winning lottery numbers :-)

  4. #4
    Join Date
    Nov 2006
    Location
    Scunthorpe, North Lincolnshire. UK
    Posts
    2,419
    Hey up Whizzer,

    This might help on the Titan Manitou MC010 Post 12 gives approximate valuation.

    http://www.airgunbbs.com/forums/showthread.php?t=313319

    Seems to be from £175 - £250 depending on stock type etc.

    Hope this helps
    Regards
    Dave (www.kwacs.org.uk) "Wildfowlers do it in the mud"

  5. #5
    Join Date
    Jun 2007
    Location
    south ockendon essex
    Posts
    2,178

    TITAN

    Hi stuart,
    is the titan the model known as the bearcat???
    What calibre???
    ATB
    Steve

  6. #6
    Join Date
    May 2001
    Location
    Bowers-Gifford, Essex
    Posts
    3,074
    Quote Originally Posted by Greylag View Post
    Hey up Whizzer,

    This might help on the Titan Manitou MC010 Post 12 gives approximate valuation.

    http://www.airgunbbs.com/forums/showthread.php?t=313319

    Seems to be from £175 - £250 depending on stock type etc.

    Hope this helps
    Regards

    i have been corrected and its actually the MT010, meaning its the ft rarer model, so looking at that thread probably £250.

    It is a 177 steve
    Click below for my super guns!!

    My Rifles

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •