does this mean we can expect a mk4 anytime soon?
Dave
Hi chums <grin, grovel, toady up>
I'm much too tight fisted to pay, but could some very nice person check the manual for silly mistakes before I print a gudzillion copies all wrong
BEWARE This is a half megabyte jpeg file, broadband downloads it in approx 6 seconds, not recommended for modem connections, and it will disappear as soon as I am happy with it.
Ta muchly
Robin G Hewitt
(EDIT2: Thanks for the correctons, file removed
Last edited by robinghewitt; 18-08-2004 at 08:22 PM.
does this mean we can expect a mk4 anytime soon?
Dave
Dunno, rather depends on whether the manual is okayOriginally posted by Lazarus
does this mean we can expect a mk4 anytime soon?
Dave
touché. I'm looking through for typo's now.
Dave
edit: seems ok, but I am dyslexic so it could all be wrong
Last edited by Lazarus; 18-08-2004 at 11:22 AM.
A quick scan shows no obvious horrors but will look in detail after lunch.
Possible omission is the number of batteries required and how to change them.
Jonathan
Robin, in the Trouble shooting section, you've written:
Is the other chrono is being affected by muzzle blast?
One too many 'is' in there mate.
Does that earn me a free Mk.4?
Jonathan.
A few more itty bitty errors that I see...
You've used the american 'center' as opposed to our 'centre' in the Err section of Trouble shooting.
There's a lack of consistency between the upper and lower case I mperial and m etric in the setting the pellet weight etc. section.
....well you did ask.
Jonathan.
Must SURELY mean a free Mk.4 now!
Instuctions page: 2nd para, 3rd line, The word "For" has a space F or
Setting the pellet weight: No. 6, There should be a space in here..read1% fast. ie. read 1% fast
How to calculate kinetic energy/Trouble shooting: There are a number of spacing anomalies on this page. Could just be the jpeg file though.
Diagram with Tick and Cross on the cb625: 3rd line should be space between ......howround....... ie. how round
Hope this is of some help
Kirk
After all that is said and done - More is said, than done!
nit picking aside - it looks fantastic and i'm all excited at the thought of the Mk4 coming out in the near future.
stand by to receive a flood of orders once it's available.
I thought I saw the light at the end of the tunnel, but it was just some ba$tard with a torch bringing me more work.
Instructions >
"...Care is required, Do not..."
Replace comma with full stop.
Sod the Typos!!!!!!!!!!
Do what all large companys tend to do....
Sell the soddin thing first...
then fix the manual
Cheers.
Roy.
If it moves.....shoot it!..If it don't move.....shoot it in case it tries to!!!
Light travels faster than sound....this is why I appear bright until you hear me speak!!!
Tried email and PM first but.....
Really 'picky' comment but could be worth noting....
There's a remark on the top right hand side that says something like; "Don't put your finger in front of the muzzle, or don't look down the muzzle unless you're sure it's safe".
This almost accepts there is a 'safe' time to look down the barrel of a rifle/gun, which there seldom is. I'm thinking this 'reverse' logic could get you into some bother later on. Especially in America. [If someone had an accident].
If anything I think you might even advise against looking down the barrel. People will, but your corporate responsibility is addressed.
...
To be good, one must do good.
Robin,
What Baldie suggests should be given serious consideration. A very good point.
Should be "companies"Do what all large companys tend to do....
After all that is said and done - More is said, than done!
don't look down the muzzle unless you're sure it's safe".
Robin,
This was a concern of mine when I first read it. Seems I wasn't the only one to consider the implications. Maybe best to omit this line altogether?
Kirk
After all that is said and done - More is said, than done!