Idiots guide to classic airgun strips (pt 1)

[Garvin]

https://forum.vintageairgunsgallery....tol/#post-4252



LeonardJ provides these pics:





PS Len made these observations when he stripped a Hy-Score:

"One of the more unusual features, for any spring gun, is the presence of a lubricating wick on the piston head. The next thing that becomes apparent, in spite of being a concentric piston action (barrel runs throught the center of the piston), there is no seal present between the ID of the piston, and the barrel - just a very smooth, close tolerance hole through which the barrel passes - the lubricants form the seal. The piston head is fastened to the skirt of the piston in a manner that allows the head to "float" - no doubt to help maintain a seal. The spring guide also "floats" within the confines of the mainspring ID. The gun uses a common O-ring seal on the piston head, and a proprietary seal within the rear end cap, which seals the main compression tube, so that all the compressed air is directed to the breech, and thus to the pellet."