2 springs wound in opposite directions have also been used to good effect by feinwerkbau in their match rifles 300S/SU
john
2 springs wound in opposite directions have also been used to good effect by feinwerkbau in their match rifles 300S/SU
john
hold me back !!
Dident Relum do this in their Tornado???
I have 2 springs,one inside the other on my Relum Telly.
as already said just get a decent top hat and spring guide if your gun has a bar from the middle of the piston that locks into the trigger you will find it a bit of a squeeze the single beast spring that robb does is very pokey and with a decent set of guides will certainly bring your gun upto speed also give all the internals a good polish and decent lube before reassembleyand she should be fine for the next 10 years
S400 Carbine
http://www.trobb.f9.co.uk/
Would the springs need a very slippery joint between them to get any benefit??? Otherwise to my figuring, two opposing springs pressed against each other and released would generate a great amount of friction at the join and while not creating any clock/anticlockwise twist, would still cause some sort of jolt??
Steve.
If they were such a good idea, all manufacturers would use them!