-
Walther P99 paintball gun
My Walther P99 paintball gun is playing up again dumping all of the gas when I try to fill it. I had this problem just after I first got it and ended up sending it off to Brococks to be repaired at no cost to me I should add. That was some time ago but when I went to use it the other day its dumping all of the gas again so I took it apart and found that one of the seals needed replacing. I looked on the RAR4 site and all that I could see was this ( RAP4 and RAP5 Care / Maintenance / Rebuild Kit for £24.00 ) all that I need is two seale I do not wish to go spending all that as I hardly ever us it. Can anyone tell me where I can buy buy them without having to buy the hole kit.
Thanks Pat
Last edited by beagle2; 06-09-2009 at 03:12 PM.
-
Hi,
You may remember I had this problem too! It looked to me like the recess in the seal is to small a diameter for the capsules so it tries to seal on the outer edges only. I was going to send it to Brocock but have instead left an empty capsule in all the time so it is permanently distorted. Try leaving an empty capsule in for a day or so and then try a full one to see if it seals. Not the ideal way to sort it, but it seems to work...
-
I bought a Desert Eagle RAM recently from a trusted contact . It arrived in mint order and it sat in its box for weeks before I got chance to have a play .
This model is the shell eject one which , er , ejects metal or plastic cases as it fires the .43 rubber balls or paintballs .
First time I gassed it up all the CO2 came straight out before I could get a shot off . Came with no instructions so went on the website . Again , no instructions , not for this particular model so I tried slide back / slide forward mag in or not in . Same thing ??
Pretty fed up having paid £200 for this ( very pretty ) paperweight !
Seems like this is a VERY common fault with these Rams doesnt it ? Brocock are going to charge me for a repair on what is essentially a new gun !!
I have no paperwork for this pistol .
Carl.
" This , is MY safety "
-
One point, the pistols should be cocked ie hammer back, before charging with CO2...
-
I got this one from (Swords and more) over the internet from Germany so I could not send it back so I sent it to brococks just in the box with no paperwork so I expected to pay £40 + for them to repair it but they did not charge me at all it just cost me £6 to post it to them. They are great fun to shoot but I wish that I had not waisted so much money on something that is always going wrong. The problem with the one that I have is not the co2 capsuals sealing its the power valve leaking I need two little rubber rings.
-
Take the O ring seals to a local seal & bearing supplier & order 10 of each in Viton, ten of each barrel & pressure vessel O rings cost me under a fiver from City Seals in Sheffield,
Regards,
Nick
-
hi, sorry to wake a dead thread. anyone know where I can get one of these pistols in the UK, I cant find any for sale anywhere. I don't mind a second hand one if anyone is thinking of parting with theirs. I don't even mind if it needs new seals. Any help would be greatly appreciated.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules