Results 1 to 14 of 14

Thread: Webley Service Mk1

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Feb 2007
    Location
    Norwich 'A Fine City' (unless you're a driver)
    Posts
    2,838

    Webley Service Mk1

    I've been offered one of these in average condition with the adjustment screw fitting. How much do these go for, in a very ball park figure?

  2. #2
    edbear2 Guest
    See here (with apologies/credit/thanks to troubledshooter)

    http://mynetimages.com/album/Trouble...e?img=4953b8c6

    Seems like a bargain to me!!

  3. #3
    Join Date
    Feb 2001
    Location
    Winchester, UK
    Posts
    15,343
    Quote Originally Posted by ogilkes View Post
    I've been offered one of these in average condition with the adjustment screw fitting. How much do these go for, in a very ball park figure?
    Is it a Webley Mk.1 Rifle, or a Webley Service Mk.2 ?
    To the best of my knowledge, there's no such beast as a 'Webley Service Mk.1'

  4. #4
    Join Date
    Sep 2007
    Location
    Rugby
    Posts
    363

    W&S Service mk2 series1

    Hi troubleshooter,
    I dont wish to hijack the thread but that is my 482 on my dining room floor, did I send you the picture? My memory is not too good these days.
    The gun is still in the same pristine condition, with approx 10 shots through it per month.
    Regards Daveh
    If you dont do it today, you might not be able to do it tomorrow!

  5. #5
    Join Date
    Feb 2001
    Location
    Winchester, UK
    Posts
    15,343
    daveh, you should have PM.

  6. #6
    Join Date
    Feb 2007
    Location
    Norwich 'A Fine City' (unless you're a driver)
    Posts
    2,838
    It is a Mk1 air rifle and delighted at the cheap price!

    Any other ideas?

  7. #7
    Join Date
    Feb 2001
    Location
    Winchester, UK
    Posts
    15,343
    What's the serial number ?
    The prices obviously vary according to condition, but a starting figure for an average, original finished used rifle is around £450.
    When you say it has the adjustment screw, is this projecting from the front of the trigger block, or underneath ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •