cold bluing
if your just doing the barrel you should get reasonably good results,
use fine wet & dry and wire wool to polish the steel,
when it's ready, degrease it and dont touch with bare hands again till you finish, cloth gloves are ideal,
Apply the blue on swabs and throw away after each pass, with plenty on the swab,
wash the barrel with water between coats, and re aply if and where needed, you can use very fine wirewool lightly between coats,
I would use all of the blueing agent on it for better results, as the rest will only dry up anyhow ,unless you have other bit's to do,
when your happy with it oil it, atb Dave
Last edited by bobby1; 21-10-2009 at 11:57 AM.
Reason: add info
, .22 Midas , .177 TX200 SR. ZASTAVA PISTOL.177.