Originally Posted by
Raygun
Be a bit awkward testing the AA cylinders after 10 years, or any time period.
They deform if overfilled and would not take the test pressure. What other manufacturers test to I don't know. If all cylinders are tested (not just samples) I can't recall seeing any stampings for any manufacturer. Some cylinders do have it etched on but would that be good enough ?
Do the "Bottle" rifles have tested/stamped bottles ?
ATB
Ray
Sports match did hydraulic pressure testing of the GC2's cylinders and I think they still have the equipment at their works,probably taken to 1.5 x working pressure. Mine had a ultra sonic/radio isotope check as did a batch in the 90's.Besides their tubes are built like tanks .
HERX77 .
Fighter against the "Dark Arts" A stranger in an even stranger land.
GC2+Leupold 14.4-34x45
AA400 fac receiver+sidewinder 8.5-34x52
Weihrauch HW77k fiddled with and doing what it wants to +Zeiss 3-9x36.
Weihrauch HW90k
Weihrauch HW97k learning from above,now sporting a Maccarri 77/97 target stock..+Bushnell 3200.Go on shoot one you know you want to
Daystate mk3 RT Delux + bushnell 4200 8-24x 40Does what it should again & again.
Fwb 124 + Optima was good is good!
Webley Vulcan.