Air Arms sidelever Spares

[anthony]

Hi all i was wondering if anyone has any Spares for any Air Arms sidelever’s ?
im after trigger internals as i got a Camargue on its way to me but it needs
i think all the trigger internals ?

and i think all the parts fit all models so if you got any trigger internals off a
Camargue / Kahmsin / Bore / Mistral can you send me a pm
cheers ant..

[harvey_s]

I'm not 100% on this - but I think there were some changes between the Air Arms & Sussex Armoury trigger internals....but otherwise I think the differing models under each marking should be the same although there might be a crossover on early Air Arms units.
I'm sure sure someone will be along to confirm or correct this....

[look no hands]

The woodstock models had different triggers than the jackel style plastic triggers also I think the sears were slightly different on later models.

Pete

[anthony]

ok thanks guys

[imorik]

Chambers still stock most parts for the AA side levers, aint cheap though .

[anthony]

i had a look on Chambers and its going to cost just over £100 for it bits that i need
but i thought i would see if anyone had any thing here first

[Murl]

Get in contact with Pad e of here, he has lots of early models and might even help you some bits to get some manufactured to patten.

[anthony]

Get in contact with Pad e of here, he has lots of early models and might even help you some bits to get some manufactured to patten.

thanks for that mate i send him a pm

[anthony]

anyone know what silencer will fit the Camargue ?

[anthony]

just an update and to let you know i got all the parts for my Camargue
i got most of parts from Julian Bond from Bond Gun Accessories Ltd
for just over £26 + post and i like to say thanks Julian for all his help
so Julian if you’re reading this thanks for all your help mate

and i had to get 7 parts from Chambers which cost £48 posted hopefully all the parts will be here by the weekend
and im hoping it will be up and running by then to. the only thing is its got a ox main spring in it
i would like to put another spring it but Julian or Chambers don’t have any
so do anyone know what other spring will fit the Camargue ?

and thanks for your help guys

ant..

ps all i need now is a silencer for the Camargue

[imorik]

Remove the Ox spring and bin it where it belongs .
Put a Titan XS in mine, it needed a coil or 2 closing up though as it was 12.5 ft/lb. 10-10.5 ft lb with 2 coils closed up.

[anthony]

Remove the Ox spring and bin it where it belongs .
Put a Titan XS in mine, it needed a coil or 2 closing up though as it was 12.5 ft/lb. 10-10.5 ft lb with 2 coils closed up.

yes im going to bin the Ox spring
and i didnt know Titan XS made a spring for the Camargue what TX spring did you get mate ?

[gingernut]

MIne has a Webley pro system silencer which I guess has been on since new. Doubt you can get a new one now.

[imorik]

yes im going to bin the Ox spring
and i didnt know Titan XS made a spring for the Camargue what TX spring did you get mate ?

Titan XS TS001. It's listed for the AA firepower/jackel, chambers list the mainspring for these and the other AA side levers as the same part number (MS012).

[JakeS410]

I fitted a standard HW77 spring in my .22 Mistral and it is lovely and smooth and just over 11fpe.

Jake