Sharp ace?/

[duomatic410]

Have a sharp ace in poor but restorable condition.
It pumps up, it holds air, and it shoots in a fashion,i e hold the bolt in as the piece of sleeve that sits under the barrel that the cocking sleeve locks onto when you turn to lock is missing(ARE YOU STILL WITH ME??)
The wood work is good, the steel has surface rust on it.
Now, do i sell as is or strip and sell for parts, have thought the barrel would go nice on the fac rapid as it would be about 21/22" and fitted with a silencer to boot,
Your thoughts on a price and which way to go please. john

[Morningstar]

Hi, if you go here you can tell us the parts that are missing if you like?

http://www.gunspares.co.uk/showcatimage.asp?id=24487
and Here http://www.gunspares.co.uk/shopdispl...=24487&cat=Ace

Also a few photos maybe of help in pricing her

ATB Graham

[duomatic410]

Looks like part number 163?? JOHN

[OLD JUD]

Looks like part number 163?? JOHN

163 is the spacer washer, if your referring to the bolt plate then it's obsolete.

[hwvixen]

Hi John,

Give me a part No. or the exact part name you are after as I have a few Ace bits "kicking around" & might be able to help....?

[duomatic410]

No, not bolt plate, but what the bolt plate turns on to tighten bolt into breach,

the barrel securing bolt goes thru it into main boddy.

GED. Where are you??? . JOHN

[hwvixen]

See if good boy Ged can help you first....(I bow to his superior knowledge ) but pm me if you are stuck...

[duomatic410]

I think iff i put my mind to it, a piece of pipe about 1/4" diameter or even a couple of washers would do the trick,

Got lots to do so will put to back of list for the time being. thanks to all. john