Fourth U.B.C MEET & COMPETITION 1st ~ 2nd May

[sol1821]

hi all

This is a quote from Mike who runs the IPAS at our Meets.





As Mike 'ewok' has said that he may be unable to come to the meet due to unforseen circumstances.

I have had another email stating that a member was going to attend but now is unable too, due to being stuck overseas.

I am going to try & get hold of some IPAS Plates so we can have the competition as normal.

If I am unable to get some plates I intend to use the Speed Memory shoot as the awarded competition, & the Shoot Your Cards Right as the fun shoot (which I only finished making at the weekend).

Click >>HERE<< for pictures.

Sorry for this however we WILL still have a good two days as we will be in good company

We was going only to do this one Meet this year, however that is always subject to change

Regards
Paddy.

That sucks ass, as the saying goes in the states by all accounts

Any chance of delta1 bringing his along if he’s got them yet? And/or maybe his shot timer?

i don’t mind recording the ipas scores for the day. all i did last time was shoot the ipas plates when no one was on them anyway so it will be just as much fun for me, if we can’t get some plates we could always re arrange some of the targets they’ve got at the greyhound, (if we were allowed for the day) it wouldn’t be regulation ipas but but square plate or bunni/crow its all the same fun

[Target Bunny]

Hi Paddy.
I have some steel sheet with the right sort of "ding" and was going to use it as a backstop. I will be able to get a couple of IPAS plates out of it if you send me the sizes you want. Let me know what sizes (I have the regs so I just need to know which ones you intend to use) and I will see how many I can get from this plate.
Jim D

[Paul55]

Hooray, I've managed to get some time to come to the meet on Sunday

I'm well chuffed, see you all Sunday

Paddy, I've sent you a PM.

Hi Paul
We will have the 'van down for this meet so Brenda can sit with Carol if she wants to. They seemed to get on OK last meet.

Jim D

Thanks Jim, we'll take you up on that Top bloke

[Pad. E]

Hi Paddy.
I have some steel sheet with the right sort of "ding" and was going to use it as a backstop. I will be able to get a couple of IPAS plates out of it if you send me the sizes you want. Let me know what sizes (I have the regs so I just need to know which ones you intend to use) and I will see how many I can get from this plate.
Jim D

Hi Jim.

Nice one thank you.

>>HERE<< is a link to the IPAS site with the measurements.

This what the UBC is all about eh. The 'can do attitude'

[Pad. E]

I've Just had a PM from Rich.

We will have IPAS for the meet

A special thanks to Delta1

[delta1]

I have the plates on order, collecting Monday, stands are built, timer's on charge (just getting the hang of it) so we're all pretty much "go" for an IPAS shoot at the Meet.

I'm afraid you will have to be a little patient, as this will be the first "proper" IPAS shoot I've done. So its probably as new to me as it is to many of you.

I've ordered the plates at 250mm by 250mm square x3mm thick so not sure what noise they will make, its going to be a little harder than last time.

The more plates the better though, maybe we could have a cammo stop plate in honour of the Main Man? (chuck your paints in the car Paddy)

[Pad. E]

I have the plates on order, collecting Monday, stands are built, timer's on charge (just getting the hang of it) so we're all pretty much "go" for an IPAS shoot at the Meet.

I'm afraid you will have to be a little patient, as this will be the first "proper" IPAS shoot I've done. So its probably as new to me as it is to many of you.

I've ordered the plate at 250mm by 250mm square x3mm thick so not sure what noise it will make, its going to be a little harder than last time.

The more plates the better though, maybe we could have a cammo stop plate in honour of the Main Man? (chuck your paints in the car Paddy)

Hi Rich again thanks.

Yep paints will be in the car I'll gladly camo the stop plate

[jefL]

Hooray, I've managed to get some time to come to the meet on Sunday

Nice one Paul, it wouldn't have been the same without you. You can compare your Rohm to my Steyr now.

Yep paints will be in the car I'll gladly camo the stop plate

Stand by for some long times then as people have to hunt for the stop plate
you can just picture it can't you; bang, plink, bang, plink, bang, plink, bang, plink, bang......?, bang........?, bang.....?, bang, plink, phew!

[sol1821]

Hooray, I've managed to get some time to come to the meet on Sunday

I'm well chuffed, see you all Sunday

Paddy, I've sent you a PM.

Thanks Jim, we'll take you up on that Top bloke

that's good to hear Paul, i don't think a big flouncy feather in Paddy's hoody would have suited him

Hi Rich again thanks.

Yep paints will be in the car I'll gladly camo the stop plate

got any orange left?

[Pad. E]

Hooray, I've managed to get some time to come to the meet on Sunday

I'm well chuffed, see you all Sunday

Paddy, I've sent you a PM.

Replied to your PM earlier I must of missed your post on here, as said to you in the PM

It's good to have all the pistoleers together, I hope

Stand by for some long times then as people have to hunt for the stop plate
you can just picture it can't you; bang, plink, bang, plink, bang, plink, bang, plink, bang......?, bang........?, bang.....?, bang, plink, phew!

That's not a bad idea but there might end up with a long que for other people waiting to have ago. So I may go the Sol's suggestion

got any orange left?

To that answer is Yes I have

[sol1821]

Replied to your PM earlier I must of missed your post on here, as said to you in the PM

it might be because hes still partially on the naughty step, a mod has to approve his posts so they don't appear for a little while

[beesl999]

Just joined the UBC, can i just turn up on the saturday please Paddy

Cheers Bri.

[Pad. E]

Just joined the UBC, can i just turn up on the saturday please Paddy

Cheers Bri.

Yep you sure can.

Could you get there before 10am so you can sign in & be there for the safety brief.

Regards
Paddy.

[cookie]

Nice to see you can now make it Paul

And a big Thank You to Richard for helping out with the IPAS problem, Top Man

See you all in 5 Days

[delta1]

IPAS plates now in the van.

Some small tweaks to the set up, (probably on site) but I'm all ready to go!