as heading
I use a pump and am getting nowhere!
I assume that there is not enough pressure to keep the valve thingy closed and so to refill I will have to use a bottle?
(its not a leak as the i deliberatly emptied the rifle)
thanks
as heading
I use a pump and am getting nowhere!
I assume that there is not enough pressure to keep the valve thingy closed and so to refill I will have to use a bottle?
(its not a leak as the i deliberatly emptied the rifle)
thanks
Try cocking it and then filling - but just remember you have cocked the rifle when you fill it;-)
Should do the trick
LeeH
Please tear carefully along the perforation.
Find out if your local gun shop fills rifles if so get it filled there to get you started again, if the cocking method doesn't work. Ask at your local gun club.
Sometimes the valve sticks open when it is totally emptied. You might even hear the air coming out the end of the barrel. Try putting your finger over the end of the barrel while you give it a few pumps of air.(make sure its not loaded first!!)
HTH....Ian
You are going to have to get a divers bottle fill to re-seat the seals.
http://www.picturetrail.com/airgunner
http://www.picturetrail.com/airgunner2388
Daystate MKIII RT (A).177" - Daystate MKIII RT (B) .22" (FAC) - Daystate MKIII RT (B2) Short .177" - Daystate MKIII Sports CDT (C) - Daystate X2 Sports R .177" - Daystate Harrier X .22" (FAC)
www.daystateowners.com
Where are you based? You haven't filled in your location!
JB
Never eat yellow snow
---------------------------------------------------------