Results 1 to 11 of 11

Thread: help! s410, empty air cylinder - can't refill

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Nov 2003
    Location
    Near Ayr Scotland
    Posts
    1,157
    Sometimes the valve sticks open when it is totally emptied. You might even hear the air coming out the end of the barrel. Try putting your finger over the end of the barrel while you give it a few pumps of air.(make sure its not loaded first!!)

    HTH....Ian

  2. #2
    Join Date
    May 2001
    Location
    Gillingham Dorset
    Posts
    3,917
    You are going to have to get a divers bottle fill to re-seat the seals.
    http://www.picturetrail.com/airgunner

    http://www.picturetrail.com/airgunner2388

    Daystate MKIII RT (A).177" - Daystate MKIII RT (B) .22" (FAC) - Daystate MKIII RT (B2) Short .177" - Daystate MKIII Sports CDT (C) - Daystate X2 Sports R .177" - Daystate Harrier X .22" (FAC)

    www.daystateowners.com

  3. #3
    Join Date
    Jan 2002
    Location
    Saffron Walden, Essex
    Posts
    2,884
    Where are you based? You haven't filled in your location!

    JB
    Never eat yellow snow
    ---------------------------------------------------------

  4. #4
    Join Date
    Feb 2002
    Location
    London
    Posts
    1,229
    thanks guys

    i've tried cocking it

    i imagine that a single stroke from the pump does not provide enough pressure to close the valve so during the up stroke the pump is simply sucking the air back out of the cylinder.

    prob needs a service anyway so no probs

  5. #5
    Skimmer Guest
    Cant remember - doesnt the manual say that the bolt has to be held back/open below 50 ?

  6. #6
    engin is offline If you can't dazzle them with brilliance...
    Join Date
    Feb 2004
    Location
    Greenwich, London, England
    Posts
    2,680
    Cam,

    Fill in your location mate.

    If you are in the South East of London, perhaps you can find your way to Greenwich and then you can use my bottles.

    If its too far, perhaps someone else near your location can sort you out.

    E

  7. #7
    Join Date
    Feb 2002
    Location
    London
    Posts
    1,229
    engin/jpd

    thanks offers.
    i'm in london but as we get mainly foxes round here rifle lives down west country

    i need a whole bunch of pellets and some cleaning stuff so need to get to a gunshop anyway

    thanks again

Similar Threads

  1. s410 cylinder change..
    By JJSTEALTH in forum General Airgun.
    Replies: 13
    Last Post: 22-06-2006, 08:08 PM
  2. S410 cylinder removal and refitting
    By bitmonkey in forum General Airgun.
    Replies: 12
    Last Post: 09-11-2005, 10:53 PM
  3. Air refill.
    By prangster in forum General Airgun.
    Replies: 3
    Last Post: 27-10-2005, 05:54 PM
  4. Cylinder Size of AA S410 .177 classic
    By RetroHunter in forum General Airgun.
    Replies: 1
    Last Post: 16-03-2005, 09:55 PM
  5. Air arms s410 cylinder.
    By p.j. in forum General Airgun.
    Replies: 15
    Last Post: 23-11-2003, 01:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •