Take the action out of the stock, release the figure 8 clamp, hold the air tube / end plug with soft jaw vice or simular IIRC
HTH
Tony
The male snap connector on one of AA's is leaking, part No' S470.
It looks a straight forward change. Bleed off all the air, unscrew and re-fit a new one.
Or am I missing something?
Ray
Take the action out of the stock, release the figure 8 clamp, hold the air tube / end plug with soft jaw vice or simular IIRC
HTH
Tony
i did'nt release the figure of 8 clamp and twisted everythng
get it from BAR as AA want a minimum of £15, and keep the old valve or send it to me