I have an AWT silencer on my 19 inch barrel and a over sized bolt made by John Bowkett both do the job spot on..
As the title says please gents also, best custom bolt handles, bout time she had a bit of tartin up.lol cheers. ..Ryan
I have an AWT silencer on my 19 inch barrel and a over sized bolt made by John Bowkett both do the job spot on..
AWT standard or fac nothing better hope thats helps
Hi Ryan
i use a Huggett and got my bolt from*bay see pics below
Steve
http://www.picturetrail.com/sfx/album/view/22732965
Nutshot,if you can find one!
Great suggestions ,cheers. How can I get either of these, I take it awt or hugget aren't in gunstores. ..ta Ryan
You can get a Huggett Silencer from Milbro Sports Ltd, there number is 01638711799.or take a look here http://huggettprecisionproducts.co.uk/default.aspx
Steve
Don't get a Logun, i have one on my 30ft/lbs R7 Mk1 and chuffs a lot more than the Evolution
John Darling JD (1946-2004) was my inspiration to be the best i can and enjoy the sport i love. R.I.P
A dedicated HW80 Fanatic and owner since 1986 to present.
I had the barrel screw cut on my last rapid and used an hw silencer
Nice one rich!
pm Reeves on here for an awt
AWT quiet but I don't like their looks.
Rob Lane-if you can find one.
New 'long' Theoben.
Standard Theoben Evo/Vortex with UK Neil internals
If you have a screwcut barrel, the HW takes a LOT of beating.
'It may be that your sole purpose in life is to serve as a warning to others'.
First of all the BEST bolt handle for your rapid is the new "tear-drop" by theobens end of, seen afew done by others and i tell you what even if you paid me I wouldnt stick them on my rapids, they look like a something a plumber would use. I have one fitted to my MK2 rapid,and it looks beautiful.
Next , silencers you have a few to pick from, I have the latest AWT fitted to my 32ftlb .22 and I have the new Theoben silencer fitted to my MK2 50ftlb .25 rapid, both are the best you'll ever want both are on par with each other.
There are afew others like the hugget and UKneils new silencer, these are the best for FAC air, the HW is good too but only screw-cut barrels and they are all near enough the same prices around the £75.00 mark.
Your only going to buy them once so why settle for less, use the best for the best.
I'm forever blowing "Bubbles"
If the barrel is screwcut - which is best - I would recommend the DM80 Series II. I have one on my Mk2 (.20 cal. 28ft/lbs) and it cuts the noise brilliantly. As it is a reflex design it isn't overly long - and it looks superb too.
http://pic90.picturetrail.com/VOL217.../370319744.jpg
The Mayor: Intent? How did you establish that?
Harry Callahan: When a man is chasing a woman through an alley with a butcher’s knife and a hard-on, I figure he isn’t out collecting for the Red Cross.