hi,does anyone know where i can get a set of seals and an exploded diaghram of a FAS 606 please, many thanks .. [post duplicated in pistol section]....greasemonkey
hi,does anyone know where i can get a set of seals and an exploded diaghram of a FAS 606 please, many thanks .. [post duplicated in pistol section]....greasemonkey
more guns than you can shake a stick at!
Seals you can get from BAR - think they are about £20 for the lot and certainly do the job ! :-)
As for exploded diagram, no idea, I am sure Domino in Italy are the main people who deal with FAS - if its a stripping down and seal change, trust me, it is a doddle and their is very little to it !
Lee
Please tear carefully along the perforation.
If the 606 is similar to the 604 model, then a strip and rebuild with the new seals is not too difficult.
But get the replacement seal kit before the strip, so that you are still familiar with how to put it together again. And use a digital camera to photograph the strip in stages - this can save a lot of time.
Good light, the right tools and an old white tea towel to strip it on may help in case any pins, springs etc fall out
There are drawings/parts diagrams etc available for the FAS 604 model from the manufacturer or the net so I would think it should be possible to get the same for the 606
May be another Fas 606 owner on here may scan and send you the manual
Good luck
John
hold me back !!
hi all, thanks for your replies,i will try BAR tommorow for the seals,i have been unable to find a schematic or exploded diagram anywhere including the makers website.the 606 is significantly different to the 604 so drawrings of that that pistol are not any use .the main problem is i bought the gun in non working order as a project and it has been stripped down before, i am not sure that the valve in particular has been re-assembled correctly hence the need for an exploded or sectional drawring if anyone has a 606 manual i would be most grateful for a copy..cheers ..greasemonkey
more guns than you can shake a stick at!
can anyone help,i cannot find anybody in the UK who can supply a seal kit for the FAS 606,also desperately need an explded drawring of this pistol..cheers greasemonkey
Last edited by greasemonkey; 29-04-2010 at 03:45 PM.
more guns than you can shake a stick at!
still looking and hoping some kind soul will help me out.....
more guns than you can shake a stick at!