Hi,

After seeing some self resetting falling plate type targets on the internet.

Like these :- http://www.doublealpha.biz/airsoft-i...setting-popper


We are attempting to do something similar.

I have now found an even better PCB board to control the Model Servos with.

Here http://www.pololu.com/catalog/product/1350

It is a self contained PCB with a USB interface for programming.

It will control up to 6 servos and you can use the servo outputs as micro switch inputs as well.

I think you could control three servos with three microswitches from one board.

The best bit is the whole board is only about £22

You then just need the servo £10 and a microswitch £0.50 and a 4.8V NiMh battery pack (I have loads from my model flying days)

Then I have to write some script routines to make it all work

I'll keep you posted. (Update to follow below)

Thanks

Mark