diana model 27 first pattern

[smallholder1]

i bought a diana model 27 first pattern from bbs have refinnished it including the making of a new piston washer,just need barrel pivot screw and cocking lever screw to compleat does anyone have any idea where to get said bits.thanks.

[Old Brass]

nice job there terry.

looks fantastic.

well done.

[inproved]

Hi,
Nice neat job,if you want deep cold blue always remember the secret is degreasing then Apply coat after coat... I always use G96 cream...

Regards

Inproved

[smallholder1]

nice job there terry.

looks fantastic.

well done.

thanks adam & michelle.

[smallholder1]

Hi,
Nice neat job,if you want deep cold blue always remember the secret is degreasing then Apply coat after coat... I always use G96 cream...

Regards

Inproved

thanks for your comment,i used a birchwood casey kit which included rust and bluing remover,degreaser and liqiud perma blue,i gave all parts several coats not perfect but good enough looks like and old finnish,and whats more it is shooting again.

[inproved]

Another old basket case shooting..neat result.....I was not being critical...about the Blue...

Regards


Inproved

[smallholder1]

Another old basket case shooting..neat result.....I was not being critical...about the Blue...

Regards


Inproved

i did not think you were being critical just being given good advice thanks again.

[smallholder1]

now fully working new spring and barrel pivot bolt for model 27 fitted perfect good power and fairly accurate for a smooth bore.

[martini1215]

Thats a pretty job you have done there,,something to be very proud of and to treasure

[smallholder1]

Thats a pretty job you have done there,,something to be very proud of and to treasure

thanks very much