hawke reflex scope trouble?

[Skany]

Hi guys!

Just got my new scope risers for my rapid7 so i thought i would have another go with my unused 4-12 x50hawke reflex!(wanted to try out a mill dot system)

I normally use a simons pro hunter 4-12x42

Now the trouble im having is i cant seem to keep the reticle in focus/sharpeness?

Also seems to be out of focus on high mag??
tried adjsuting but on the rear eyebell adjuster but still seems not right at all??

Any help will be great!

Andy

[Numb Nut]

This is common to all scopes with fixed parallax (factory set to 100 yards usually). You can reparallax it to about 30 yards if you're careful, see this article: http://www.total-pestcontrol.co.uk/lee/scopeparalux.htm

[Skany]

This is common to all scopes with fixed parallax (factory set to 100 yards usually). You can reparallax it to about 30 yards if you're careful, see this article: http://www.total-pestcontrol.co.uk/lee/scopeparalux.htm

Nice one m8

finger tight what a piece of p****

Still dont seem as bright as my simons!

Ta very much!
Andy