Hi
I will take the piston if available
let me know how much money to send you.
Best regards
Neil
Hi all, i've taken in a BSA airsporter (well 2 of them) and one is seemingly beyond economical repair, both rifles have been made into one working rifle and a pile of spares. they are both mk6 and 7 guns, so, if anyone needs any spare parts..... just ask
the sights are gone but there is a beech stock in decent nick, barrel and comp tube, underlever, piston with head and old seal, trigger parts (sears and springs) and the odd bolt and pin, loading tap etc.
If you are really desperate the trigger block would do but the guard has been bent and straightened (not very well though)
Also, i have a meteor which is a bit rough around the edges, most parts available .22 barrel is good (will fit other bsa's)
PM's might be best.
PAUL
Hi
I will take the piston if available
let me know how much money to send you.
Best regards
Neil
And the loading tap, trigger/block, underlever, bolt and stock
Neil
Hello Paul. As per my PM ( suggested by you) sent at 10.22p.m. yesterday I should like to buy the loading tap lever & screw. Thanks Camcoll.
Hi Neil the piston is still available but the head has sold already via PM, i can however make you one up with an uprated seal and buffer washer if you wish? £15 posted? the trigger block has been damaged and sort of straightened but aint right, it's currently minus a trigger blade but the sears and spring are with it £10 posted, loading tap lever is sold and the underlever/ slide and slide link bar is £17.50 posted. I'll do all 3 bits for £37.50 paypalled and posted if you wish?
Hi camcoll, tap lever and screw for £7.50 posted and paypalled?
airsported bits still available if interested,
Barrel and comp cylinder, £15 posted as it's on the rusty side but straight.
beech stock, £25 posted, very minor damage to underside of butt.
meteor parts all gone!
PAUL
Hi Paul,
Do you know if the stock will fit an airsporter S. Or could anyone help and let me know if a mk6 stock will fit an S
Thanks,
Ken
Last edited by ken69; 20-06-2010 at 07:53 PM.
I think it will but to be sure i'll need the s's serial code ie GL, GJ etc.
PAUL
Hi Paul,
Serial number starts with GM
Hello Paul do you still have the stock?
Hi would you have the end cap off the comp tube for the meteor.
Regards Keith