GinB

[LANKY MK]

Hi Guys

Ive just ordered a GinB FT-09 stock for my HW100S...... WUPEE

Should be finished in 2 to 3 weeks, im having it left unfinished so i will have to apply my own finnish, any suggestions?? (its the teak doreng wood).

Mark

[ikarma70]

Danish oil is always good but don't use it like a varnish.

[bigtoe01]

Apply Danish by rubbing in, waiting 15mins then wiping/buffing off excess. Then 6 hrs later do the same.

10 coats later you should have a nice satin finish on the stock and plenty of protection.

[Mikes]

CCL kit includes red oil and hardener traditional takes a long time but a super job

[POK!]

I agree with Mikes. Use Alkanet oil for colour (TD can sometimes look a bit yellow) and a proper blended oil intended for gunstocks.

I have an oil finished Ginb in Teak, HW100 in sig.

[garya]

i just ordered the ft 04
expecting in 3 weeks and going to oil it myself also.

[hairbear]

get it cammo'ed by Pad-E or creosoted

[Charlts]

Mark, Tung oil is the best I've come accross as it's a nice matte finish which can easily be buffed up using wax. It's whatI have on all my guns.

[LANKY MK]

Thanks for the advice guys, so its down to CCL oil, Danish oil or Tung oil (alkanet oil for colour).

Ive got some CCL oil and Rubi Tong has said i can use his natural danish oil, im guna have to see about tung oil ryan ive never heard of that before .

Again thanks guys

PS: i didnt think at the time so i never asked Andrea (of ginb) but do the stocks come with the appropriate fittings ie: bolts to secure the stock to my gun?

Mark

[LANKY MK]

i just ordered the ft 04
expecting in 3 weeks and going to oil it myself also.

Looks like your steyr guna have some nice wood, congrats

[garya]

i assume i use existing fixings
i shall ask him that one