Taking the P...err... parallax....

This scope was not designed for FT, and I cannot see how you would fit a large wheel in any event, it does not really have a large enough magnification to range find.

One interesting effect though is that although the focus snaps in quite precisely, if you are shooting prone it only seems to effect the middle say 40% of the image (in that this area is sharp while the top (distant) and bottom (foreground) are blurred slightly).

Because of the large field of view, the temptation is to look round the image and think...”Hey, the top and bottom parts of the image are not in focus”.

This phenomena is more noticeable in the prone as you are at a much shallower angle to the ground. Kneeling or standing you probably would not realise.

With a conventional scope at 10x, with the subsequently narrower FOV, this phenomena would not be noticed so readily, but since you can now see ground that starts much closer to the scope than normally, the fore ground as well as the background are now out of focus.

This is to be expected and is normal with the Viper connect, once you understand why, it makes sense. I noticed it to some extent with my big Viper last night out rabitting, but it only really waves at you in the prone.

The parallax control is very smooth, but due to it’s close proximity to the IR on off switch, and similar shape, I would like to see some lugs or castellation on the edge of the control so you know which one you are trying to twist, particularly with a gloved mitt while staring down the tube at your intended victim.

This is the only scope that I have been able to practice standing shots with in my garage, at only 6 yards, at 10x, and be in crisp focus (and still have some left). The ideal rat basher then? Could be.

Rubber cups!!

Ooh errr...Well you have to cater for all..

The scope is supplied with a rubber eye cup that is used (Optionally) to keep light out while allowing the eye to “Connect” directly to the ocular bell.

With the Connect 01, as I stated earlier, this was pretty much vital in order to get the correct image.

With the Viper Connect, you have much more leeway, and I personally found that the scope performed more or less conventionally off the bipod without the cup.

I had a full image at all times, and put 5 fills through my BTAS100 prone over approx 2 hours with no more strain on my neck or eye muscles than with a standard scope.

I am not saying the cup is not necessary, just not essential. Some will use it, some will not.

However, having spent some more time with the scope I noticed an effect where the rubber eye cup will actually help (aside of the fact that it makes life a lot more comfortable).

I suspected I was having focus problems with the close eye relief, as the ret focus seemed to be going in and out slightly.

What was actually appeared to be happening was this.

The connect is a short/zero eye relief scope, so it depends on your eyeball being pretty close to the ocular lens to work correctly (in that you need to see all of the image, not a slightly clipped version created by not getting into the eye piece correctly).

I found that if I moved my eye about off centre the ret (particular the IR) smeared slightly.

Fitting the eye cup cured this in that you have to get your eye into the right position to use it, and you also get the usual advantages of a scope enhancer of sorts.

What I did find with the old Connect 01 (and my NV) was that the close proximity of the eye in cold weather, allied to the rubber eye cup, lead to almost constant misting. That said, I have found the same today with very hot/humid weather and the new connect...so off it came.

I have found this with all sorts of close coupling optics, it is a disadvantage of the necessity to be close coupled to the ocular lens, and not of the Viper connect per-se.

The cup does act as an aid to correct eye position, and it does an excellent job of keeping the glare off the ocular and enhancing the image, so it will be kept on my connects and generally used.

You must be aware though that anyone used to using the Pigs ear type enhancer, or the longer fairing types, will come unstuck here.

Any eye cup really needs to be fully cylindrical on this scope as the eye relief bell is adjustable and rotates in order to do so, so whatever is fitted, needs to work in any position. The extra point of contact with the scope really used to help stability with the Connect 01, and in order to exploit this advantage in all positions with the Viper connect, the variable eye relief is crucial.

In the field

I took my new acquisition to my first visit to an FT club a few weeks back.
One chap wielding an electronic beast with a sight nearly as large...and a feather....suggested I would not see the target at 50yards let alone hit it with my small scope.

Lady luck (because in all fairness I would not normally bother shooting this far without a bipod) did not desert me.

I propped it first go, then continued to do the same from the kneeling position. OK, hardly Vasilly Zeitsev, but given how dark and dingy it was in the wood, I thought the little connect did itself proud.

Then we went rabitting....that was fun. Rabbit 1 was dropped again, in a very dank wooded area, where I would have normally spent an age trying to find it through the scope. It was only a 25yd shot, but he bought it, text book, kneeling...he was alert, and he may have been onto me but just did not get time to leg it.

The second rabbit was similar. I was not particularly well cammed up and out on the open, so it was a case of first to the trigger.

This rabbit popped out at 30yds, but was disturbed by me bringing the rifle on aim.

Rather than leg it, it backed into the bracken and stopped there, thumping and telling the world I was about.

He was not acquainted with the Connects quick acquisition, or its brilliant image, so he bit the dust also, with just a few kicks registering his distain for MTCs new baby.

I initially wanted the Viper connect for squirrel bashing. That particular avenue or carnage has been restricted somewhat in that our new keeper actually...well...keeps, which means that the tree rats are much thinner on the ground.

Imagine my delight when, out on a quite overt target bashing session, a tree rat signalled his approach by the usual crashing about in the trees next to where I was shooting.

The speed on aim was just plain unfair....I picked up the hawks dinner for the next few days.

I have been back to a conventional MTC Viper since for rabitting and, with the combination of AMD ret and the Connect technology now missing, it felt quite odd to be honest.

You get used to the image quickly and soon miss it.

Summary

Well, all I can say is that in the Viper Connect MTC have ticked all the boxes.
It used to be that you would buy, say a 3-12 x 40 for hunting, then maybe a 1-5 x 25 for ratting or squirreling, or even lamping. For HFT see the above.

Now you need buy only one 3-12 x 32 scope that will quite literally do it all, and a bit more.

The Viper Connect is compact, precise, light, intuitive, flexible, sharp, probably a scope for all seasons.

Taken as an aside, the AMD ret inspires accuracy, and the single illuminated cross is so much less intrusive than the busy rets found on other scopes.

Allied to the Viper Connect this is a field combo that will be difficult to beat.

Don’t do as Gary would suggest and sell a kidney...maybe just a finger...or a...no, no,

As Basil Fawlty would say "You'd have to sew em back on first!"

I have all of my essential parts and have ordered another for my other hunting rifle...anyone want a Sidewinder 30?

I suspect the “for sale” area on here may be offering up a few conventional scopes, as folk try to standardise with the Viper connect on their PCPs, it really is that good.