Attn FWB Sport Enthusiasts. Help required.

[Herpquest]

I am in the latter stages of building a 127, after purchasing a barrel and empty cylinder a few months ago.
I have managed to source every part to complete the build, except two - the trigger adjustment screw and the safety slide.
If you have either or both of these parts spare, and are willing to part with them, please PM me.
Thanks for your attention.
ATB, Eric

NB. I have tried Alan at MAG, and John Knibbs to no avail.

Trigger adjustment screw still required PLEASE!

ALL SORTED, thanks to the kind assistance of Chrisn for making trigger adjustment screws for me, and Vic Thompson for supplying the safety slide - and Mallyally for
the measurements! What a great group of members we have on the Premier Airgun forum!!

[rookie2767]

Hi Eric,
Hope you are keeping well. Try Maccari in the USA. They are very helpful and quick. Chances are they will have the bits you need and will post them. E-mail them (address on the website) and they will get back quickly.

Best wishes,

Matthew

[thainybiker]

Hi Eric - maybe you can give me a bit of advice where to find a replacement trigger ?
(blade only not the complete unit - have seen them at Maccari but very expensive)

Sorry I cant help with the trigger adj. screw and safety slide.

All the best
Les Sutherland

[Herpquest]

Hi Eric,
Hope you are keeping well. Try Maccari in the USA. They are very helpful and quick. Chances are they will have the bits you need and will post them. E-mail them (address on the website) and they will get back quickly.

Best wishes,

Matthew

Thanks Matthew. I e-mailed Jim over a week ago and am still waiting his reply.

Regards, Eric

[Herx77]

Might be worth contacting Dave Welham of Airmasters 88.In the past he did a fair bit of work on FWB's and modded trigger replacements for both the 124 and 127 models, might have a few left in the odds and sods box.Find him in the back pages of your favourite airgun mag;worth a try at least.
HERX77 .

[Herpquest]

Might be worth contacting Dave Welham of Airmasters 88.In the past he did a fair bit of work on FWB's and modded trigger replacements for both the 124 and 127 models, might have a few left in the odds and sods box.Find him in the back pages of your favourite airgun mag;worth a try at least.
HERX77 .

Thanks HERX77, will certainly get in touch.
Regards, Eric

[Herpquest]

Still requiring the trigger adjustment screw please.

Regards, Eric

[Herpquest]

Still requiring these parts.
Vic Thompson please PM me..
Thanks, Eric

[Herpquest]

Safey slide obtained thanks to Vic Thompson.
Trigger adjustment screw still needed.
ATB, Eric

[mallyally]

realy hard to take a picture of something so small but


as i said int PM
its a 4 mm cheese head screw 40 mm long with 28 mm of the thread removed
and wouldnt be too difficult to make or have made
it has a circlip groove 7 mm from the end but this is really not necessary

[chrisn]

i can make this screw, cos i made one for my sport..£3 inc post if youre interested..thanks

[mallyally]

there you go sorted what a great place this is

[Herpquest]

Thanks Mallyally and Chrisn, very good of both of you. Your help is very much appreciated.
Regards and ATB, Eric