Reply With Quoteyou can have the 4" i took off mine if you likeOriginally Posted by Hsing-ee
http://www.airgunbbs.com/forums/showthread.php?t=480944
may also be employed in conjunction with a drawn reciprocation dingle arm, to reduce sinusoidal repleneration
Anyone want to swap a .177 barrel for a HW85K for the .22 one off mine? Or a normal length .177 barrel from an HW85 for my .22 one?
Nails Mc Fugger
you can have the 4" i took off mine if you like
http://www.airgunbbs.com/forums/showthread.php?t=480944
The Chrono Slayer
A HW80 barrel will fit too as i have a HW80 but with a 177 HW85 barrel fitted
John
for my gunz guitarz and bonzai, see here
www.flickr.com/photos/8163995@N07/
may also be employed in conjunction with a drawn reciprocation dingle arm, to reduce sinusoidal repleneration
Hello John, I have an HW80 .177 with the normal barrel length fitted, so do you want to swap the HW85 barrel on your 80 with the HW80 .177 on my 80 so I can have the HW85 barrel on my HW85 and I can put the HW85K barrel on my HW80 then? Maybe?
Registered User
The barrel on the recent HW85's is an identical breech fitting to the HW 95 and HW 80 and are interchangable. If you have an earlier 85 with raised sight rail from the early 1990's it may well be different.
Barrels are available from Chambers for about £75. A HW98 barrel is only about an extra £10.
Make every shot count.
The Chrono Slayer
Ooooh crikey- i'd forhotten about this
Hsing-ee, i don't think you'd be very happy with a trade as my barrel has been painted by a previous owner
John
for my gunz guitarz and bonzai, see here
www.flickr.com/photos/8163995@N07/
Posting Permissions
