Results 1 to 15 of 277

Thread: MTC Viper Connect

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Sep 2012
    Location
    Taunton
    Posts
    478
    Quote Originally Posted by Kyoto View Post
    Then I took it out hunting & things weren't quite so good. The sight picture seemed over contrasted & harsh & there was a pronounced vignette effect around the perimiter of the glass.

    I also found that I was constantly on the side focus which seemed overly critical of even a slight change in range. I honestly thought that the 'scope was faulty & returned it to MTC for checking. It came back with a clean bill of health, but to my eyes it was still as before so with some regret I sold it.
    Ken
    I agree with this, the depth of field is very narrow. The vignette effect is there but doesn't really bother me.

    Quote Originally Posted by bullet boy View Post
    After using this scope a lot more now I have noticed it is very good in low light conditions!!
    I now have a problem-I want another Connect scope!!Think I'll get a AMD reticle one next time!!
    Superb scopes!!!!
    I agree with this too! The VC has great low light performance.

  2. #2
    Join Date
    Oct 2011
    Location
    tredegar gwent np223jq
    Posts
    279
    Well I have had two connect scopes the first with amd recticle was great no problem getting the recticle to focus so being the way I am thought that the scb recticle would be better for hft very disappointed unable to get the recticle to focus great service from bar refunded my money no probs just wondered if the scope was faulty bar said it was fine don't think there was enough adjustment to focus the recticle I have got bad eyes for reading but don't wear glasses for shooting

  3. #3
    Join Date
    Apr 2003
    Location
    Aguilas
    Posts
    25,703
    I agree with Poth. The diopter adjustment could do with being more, we are working on it

  4. #4
    Join Date
    Sep 2012
    Location
    Taunton
    Posts
    478
    Quote Originally Posted by Gary C View Post
    I agree with Poth. The diopter adjustment could do with being more, we are working on it
    Is this a problem only with the SCB reticule? Mine has the AMD reticule and is pin sharp.

  5. #5
    Join Date
    Apr 2003
    Location
    Aguilas
    Posts
    25,703
    Quote Originally Posted by banksy! View Post
    Is this a problem only with the SCB reticule? Mine has the AMD reticule and is pin sharp.
    Nothing to do with the ret, the dipoter adjustment compensates for variations in eyesight and if your eyesight is too long sighted the connect may struggle

  6. #6
    Join Date
    Oct 2011
    Location
    tredegar gwent np223jq
    Posts
    279
    Would be nice if you could put a half mill dot recticle in as we'll like the hawke half mill dot fantastic recticle recon they would sell by the bucket load I would certainly go back to one as there was no parallax error due to being so close to the scope depth of field could do with being a bit more as well another 5 yards and it would be the perfect http scope

  7. #7
    Join Date
    Apr 2003
    Location
    Aguilas
    Posts
    25,703
    Quote Originally Posted by poth View Post
    Would be nice if you could put a half mill dot recticle in as we'll like the hawke half mill dot fantastic recticle recon they would sell by the bucket load I would certainly go back to one as there was no parallax error due to being so close to the scope depth of field could do with being a bit more as well another 5 yards and it would be the perfect http scope
    AMD is half mil dot, and DOF can't be designed in

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •