MTC Viper Connect

[Airwolf 1968]

having just bought one.i was wondering why no rear lens cover?,no mounts.does anyone now where i can get some low mounts to fit this scope onto my s400k.i have medium mounts at the moment but the s400 rail is so high i can not take advantage of the scope being so small and therefore mount it as low as possible.very pleased with the scope,shot a 99 on my lsr straight away and tested the scope outside from 8yards to 45 yards to simulate hft and it is better than my mamba lite i was using

just use any make 30mm low mounts put together at front of scope wont hurt the scope as there is no specific mount made for the connect though sportsmatch were looking at doing one

[Charles44]

I have used a Sports Match reach forward mount with one of the two clamps cut in half (one bolt each side rather than two) - gives a nice low scope height and allows the scope to be fitted to rifles which have the breech opening where the two standard mounts would be on the objective lens end. (mine is on an EV2)

http://www.jsramsbottom.com/products...p-mount-44mm--[op44]-reach-forward.html

[Gary C]

just use any make 30mm low mounts put together at front of scope wont hurt the scope as there is no specific mount made for the connect though sportsmatch were looking at doing one

POD on here does a specific mount matey

[IanT]

I have a Viper connect on a HW100kt and really happy with it and I use it for HFT,
at the moment my mag is 10x and zeroed at 35yards I was just wondering what everyone else was zeroing at?

Any info is much appreciated.

IanT

[salop sniper]

I have a Viper connect on a HW100kt and really happy with it and I use it for HFT,
at the moment my mag is 10x and zeroed at 35yards I was just wondering what everyone else was zeroing at?

Any info is much appreciated.

IanT

I too would be curious to hear what others are setup at !

[Charles44]

I too would be curious to hear what others are setup at !

Zero and parallax at 30yds - it is what I have used for a while and seems to work for me on both the Connect and standard 10x44 Viper (both with SCB ret).

[Ash.]

POD on here does a specific mount matey

Like this one you mean

http://img585.imageshack.us/img585/1778/cimg0385z.jpg.

http://img26.imageshack.us/img26/1221/cimg0384e.jpg

[The Robin]

Yes thats the mount, i have one top bit of kit and pod is a very nice guy to deal with