Results 1 to 15 of 105

Thread: Hawke "Panorama- EV" 4-12x40

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2011
    Location
    Saffron Walden
    Posts
    35

    Mate had one of these

    My mate had one of these. he loved it.


    Quote Originally Posted by Amac View Post
    Ordered this scope on Saturday night directly from Deben as I dont believe they are in the shops yet. It arrived this morning so well done Deben on that front.

    Having read the specifications regarding this new range from Hawke, it certainly looks like the range has been designed with Airgunners in mind. I have been looking for a reasonably light 25mm scope to sit atop my Rapid MFR primarily for field use, and this one sounded like it might fit the bill.

    Anyway, on unpacking the scope, I was pleased to find a couple of rubber flip up lens protectors provided and decided to weigh the beast immediately. She came in at 1lb 3oz so will not overload the very pointable Rapid in any way. Slotting the optic into the standard 25mm Theoben mounts, I was pleased to note that despite the inclusion of an adjustable objective, there was a good clearance above the barrel shroud, even with the lens cover fitted.

    Next job was to set the fast focus ring for my apparently failing eyesight in the fading afternoon light. Once that was sorted I was intrigued to see if the "Extended View" facility actually made any noticeable difference to the sight picture. Hawke claim an additional 20%, but to me, I couldn't honestly notice any apparent difference in field of view. What I did notice however was the amazingly sharp image and optical clarity of the lenses, with a genuinely bright pin sharp image from edge to edge and good colour saturation. Next it was the turn of the blue/red half mill dot illuminated reticle to be given the once over. I have always considered the Hawke half-mil reticle to be an excellent choice for both HFTers and hunters like myself, and I was not disappointed with the genuinely useful ability of the scopes "MAP 6A" reticle to change from the more day focussed blue( looks particularly good) to the red I would use for evening shooting/lamping sessions.

    The low profile turret "finger tip"adjusters live safely under the cover of the usual screw caps, and it will be my intention to check upon any zero shift when adjusting the mag at my clubs indoor range tomorrow evening.

    It will be my intention to add to this review when I have had a chance to give the scope a thorough thrashing in the field, at HFT and of course the indoor range.

    My initial impressions are that the scope represents somewhat of a bargain for anybody looking for a scope suitable of doing most things, apart from range finding as our colleagues in FT do with their "torpedo-tube esqe" optics. To say I am impressed at this stage would be an understatement.

    On my usual HFT rig lives a Bushnell 6500 and very nice it is too. Considering that it cost nearly three times what this Chinese produced Hawke has on offer reminds me of just how far the Chinese have come in the production of relatively low priced high quality optics. OK, its not a Zeiss or a S&B, but for the money it represents outstanding value for money in my opinion and is well worth checking out for yourselves.

    I will of course add to this review as and when I discover the optics good and possibly bad points, although at this early stage I think I might be struggling to find any bad ones!

    Highly recommended.

    Andy

  2. #2
    Join Date
    Nov 2010
    Location
    Dunstable
    Posts
    530
    I brought one of these yesterday, nice scope , had a little play with it and all seems well.
    Mounted it on my Falcon , and it was fairly easy to set up.
    My only comment with it, well not the scope more the instructions that come with it, they dont represent whats in the box and are more of a general guide.
    I did go to the Hawke web site but they dont appear to have any instructions that just relate to this scope?
    I am going to mail Hawke and ask the question.
    simple things like, where's the battery? i know where it is but if you were new to scopes you might not know!

  3. #3
    Join Date
    Nov 2010
    Location
    Dunstable
    Posts
    530

    Thumbs up

    Just got this reply from Debden.

    I have just spoken to the gentleman that deals with the manufacturing and design of the riflescope range. He has assured me that the instructions are in the process of being re-worked with more information to help the end user. He has not been able to give me a date of when these will be available, but once they are, they will be in a PDF format to download.

  4. #4
    Join Date
    Jan 2010
    Location
    Formby
    Posts
    3,278
    Thanks Bonz.
    Member, the Feinwerkbau Sport appreciation Society (over 50's chapter)
    http://www.rivington-riflemen.eu/ Andy, from the North !

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •