hi can anyone give advice on how to strip a tracker and which spring to use
hi can anyone give advice on how to strip a tracker and which spring to use
I cant remember if I put one up in the "idiots guide" at the top of the page but it is the same as the Osprey apart from the piston washer. I would just use a standard spring from Chambers. I also advise doing away with the safety catch and using a sear spring from a Victor. Makes the trigger a lot easier to do
Cooler than Mace Windu with a FRO, walking into Members Only and saying "Bitches, be cool"
There was a recent thread on the Tracker:
http://www.airgunbbs.com/forums/showthread.php?t=493320
There was an article by Jim Tyler on the Webley Tracker in the "May 2010" issue (Volume 33, Issue number 9) of "Airgun World". The article states that the Tracker was based on the Viscount, which was based on the Osprey, which was the sidelever replacement for the Mk3. For the purposes of the article, Jim bought a cheap example of the Tracker for £70 and then stripped it down.
Am sending you a Pm that may help.
Cheers, Phil
email on the way with a strip down guide
andy
thanks very much to all those who sent me advice, im stripping this weekend and i will let you know how i get on