Anyone know where you can obtain a .22 bullet mould that replicates the 30 grain bullet that North American Arms supply for their Companion BP pistols?
Thanks Dougie
Anyone know where you can obtain a .22 bullet mould that replicates the 30 grain bullet that North American Arms supply for their Companion BP pistols?
Thanks Dougie
Last edited by Dougie; 17-11-2010 at 09:20 AM.
If you can't get them in the UK, you might want to try North American Arms directly.
Jim
UBC's Police Pistol Manager
"Nasty, noisy things, revolvers, Count. Better stick to air-guns." Sherlock Holmes, The Adventure of the Mazarin Stone
These guns are shipped from the factory with the bullets that are ordinarily loaded in .22 short cartridges. Acquiring a mold ay prove difficult and would have to be a custom mold I reckon.
However, there are probably a couple of options. See if you can get an ammo company to sell you just the bullets or have you thought about "round ball"? #4 buckshot is .24 calibre and may go quite nicely....
Failing either of he above, the bullets are availibe from NAA direct.
Lyman do a 22 mold - its about £70 though
You might find a .22 LEM Spitzer mould if you ask in the Collectable Airguns section. This was a mould for casting solid bullet shaped airgun pellets circa 1970's-1980's. I've read of people using them for loading .22 Hornet cartridges so they might be ok for a BP revolver.
Alternatively, send an email to NAA and ask if they have an agent in UK (or Europe) where you can buy the bullets from. Sales contact from their website is kenny@naaminis.com
I collect vintage Japanese air rifles & vintage Japanese pellets
Information sought about antique firearms with Japanese markings, do you have one ?
I collect vintage Japanese air rifles & vintage Japanese pellets
Information sought about antique firearms with Japanese markings, do you have one ?