i agree with Hares Ear,
the amount of lead build up shouldnt be as much as hes getting, however im sure ive heard hes shooting at the high end of fac (roughly 40 ftlb)
in contrast ive heard amazing things about the ev2 barrel (formerly known as the czech s200 barrel) infact im getting one soon to replace the straw type barrel on my s410, if it needs cleaning after every 150 shots then so be it, its probably a good thing as looking after your rifle is a necessity anyways.
anyone have experience with both barrels?
andy
christ almighty i'm sure i dont clean my .270 in 150 rounds .stop arguing ladies about pop gun barrels.....kiddin kinda but cmon
"christ almighty i'm sure i dont clean my .270 in 150 rounds .stop arguing ladies about pop gun barrels.....kiddin kinda but cmon "......oh my! i thought this attitude was long dead...if you read a few of the threads on here you will understand...education is all.Hate ignorance.
If you look at the review of the FX Independence in Airgun Shooter you will see that the Smooth Twist Barrel grouped very badly. I wouldn't touch it.
FX Cyclone .22 + Hawke Sidewinder30 4-16x50 (SR6)
One other thing that should be taken in to consideration regarding all the hype about smooth twist barrels is ease / cost of manufacturing. If they are (and the hype says they are) just externally formed without dies / cutting tools etc the speed, and therefore cost, of manufacturing will be greatly reduced.
When it comes to profit wording can be manipulated to mean a lot of things
Regarding all the articles about smooth twist, I would take it all with a pinch of salt at the moment. All the reviews and articles so far (that I have seen) have been in magazines and magazines rely on advertising (both current and future), read into that what you will.
I've never seen a smooth twist, let alone tried one, but when I do I'll bear in mind that there's a lot of external forces that can / will try to influence peoples opinion of them.
they are MORE expensive to produce than standard barrels, the special 'blanks' (in fact specialist tubing) costs nearly as much as a LW rifled blank (ie. the unworked FX balnks cost nearly as much as the worked LW blanks).
One aspect of the SmoothTwist barrels is their seeming immunity to fouling & they dont cut the pellet resulting in a more uniform projectile.
The guy who made the video is in the States and shoots at FAC levels, he's had an Edgun for a while - they are often messed with to get max power, that could well be his problem here. Most American air gun users select pellets on a weight basis (for some reason ) I've tried to educate them about head sizes etc. but they tell me the makers dont provide the information, well that could also be an issue with his LW barrelled Edgun.
FX will not be making SmoothTwist barrels available to the public.
All published tests have been carried out with total honesty, your post suggests that the writers are lying and I influence the outcome by advertising my barrels in there magazines, give me the month and title of the magazine if that is the case or dont put in print something you may regret.
You can come and test SmoothTwist for yourself on our indoor range any time you like if it will make you happy, however I am sure your blinkered aproach will endure.
Ben
Ben
As someone who has actually carried out tests on a SmoothTwist barrelled Ruger10/22 and achieved fantastic results with it at 100 yards, I take exception to a prick like you saying that I have been influenced in any way! You are of course entitled to your opinion, but as you have stated, you've never seen a smooth twist, let alone tried one, so why don't you just **** off until you have!
There, stick that in your (non SmoothTwist) pipe and smoke it, as my Gran used to say.
Last edited by Graham2; 09-02-2011 at 11:43 PM.
Having made and sold tens of thousands of air rifles fitted with the German made barrels I know how many are rejected as substandard, FX have also suffered this same problem with the same manufacturer until they are forced to make there own useing my SmoothTwist system.
They are now getting the consistent accuracy they require in production, far better than they have ever had before.
Pray tell me what you are basing your comments on, a few rifles bought and sold maybe, thought so
Ben
What has a "brass spring" got to do with anything anyway?
Those recovered .22lr were recovered by a secret process, no water bucket involved.
"Shooters, regardless of their preferred quarry, enjoy their sport for its ability to transfer them from their day-to-day life into a world where they can lose themselves for a few hours". B Potts.