s200 fill pressure????

[thommo]

as title someone i know has just bought one but he forgot to ask what pressure to fill it to, is it the same as my s410 about 190 bar or is it lower?


thanks in advance,

[stevecoo]

Hi thommo
fill mine to about 170-180 bar

Steve

[thommo]

thanks mate

let him know,

[stevew71]

Most of the ones I've set up seem happiest around 165 - 175 bar (to get the sweet spot).

[Davestate]

165Bar here too, for 45 shots at full power before it starts to drop off.

[thommo]

many thanks guys

[Bertie]

Most of the ones I've set up seem happiest around 165 - 175 bar (to get the sweet spot).

Exactly what I found with my S200.

[Johnny - Sweden]

That is not so high...



I fill my Cyclone to 220 bar.

[stevew71]

That is not so high...



I fill my Cyclone to 220 bar.

But guess what ? it's not a Cyclone it's an AA S200!
(oh and my MFR is a 248bar fill )

[Johnny - Sweden]

Then it can be fun to fill a MFR using a stirrup then..

[Sniper 296]

I am getting 50 shots at 10.8 ft/lb - 11.8ft/lb at 175 BAR!

[Rapidnick]

For Johnny-no self respecting Rapid owner should be using anything else other than dive quality air! Surely you don't use a pump with your Cyclone do you?

[Johnny - Sweden]

Surely you don't use a pump with your Cyclone do you?

Thats just becouse its not worth the effort.

I live a hundred yards from the coast to the sea and the town nearby have a divingshop with cheap air that is open all year long.

However: point is - I can if I want to, the tube on the Cyclone is aluminium and it wont take damage of air with moisture inside, like a steeltube would do.