Results 1 to 7 of 7

Thread: Hull Cartridge

  1. #1
    Join Date
    Nov 2010
    Location
    sunderland
    Posts
    298

    Question Hull Cartridge

    Hi am thinking of getting a HW45, can anyone explain please what is Hull Cartridge, Many Thanks :

  2. #2
    Join Date
    Dec 2010
    Location
    Nuneaton
    Posts
    1,092
    They are the uk distributors
    A few air rifles and pistols Daystate Owners Club

  3. #3
    Join Date
    Dec 2009
    Location
    Cheltenham
    Posts
    2,502
    Hull Cartridge is the official importers of Weihrauch, so guns that are not 'grey imports' will be stamped 'Hull Cartridge', be UK spec and carry a warranty from new. However, vintage ones won't be stamped.

  4. #4
    magicniner is offline The Posh Knocking Shop Artist Formerly Known as Nocturnal Nick
    Join Date
    May 2009
    Location
    Rotherham
    Posts
    5,314
    They have an abrasive chop saw for springs
    Airgun Repairs, Bespoke Airgun Smithing and Precision Engineering Services
    http://www.magic9designltd.com

  5. #5
    Join Date
    Apr 2007
    Location
    Leicester East Midlands
    Posts
    1,537

    Chop Chop

    Wot the Man sez Above,

    I bought a Weihrauch ( Holy Smoke) 95 it was as rough as a rasp!

    I shot it for a while with no improvement,

    I determined to send it back but then my knee konked! out and I was off the road for a while,

    Then arrived the great day and I got an NHS knee joint, Brill! but the warranty was out of date for my Boinger!

    Saved for the dosh to send it to UK Neil, the result is in the mag ( better not advertise, to avoid the Wrath Of )

    Neil did the deed and I have a 95 fit for a Prince,

    So you lot of Plebs can Sod! Off

    Will not buy Hull Cartridge Products In Future.

  6. #6
    Join Date
    Mar 2011
    Location
    ipswich
    Posts
    18
    should a 1992 HW45 be stamped "hull cartridge" if so where?

    thanks

  7. #7
    Join Date
    May 2006
    Location
    Morley, Leeds
    Posts
    1,954
    Quote Originally Posted by magicniner View Post
    They have an abrasive chop saw for springs
    Done at factory by HW I'm afraid. I too thought HC did it but they don't even open the boxes it seems. HW have "export" springs for the US and other high power markets, and the 7.5 joule ones for the domestic market. UK destined rifles get chopped export springs. I did hear though that HW were stopping this and all rifles would get properly finished springs.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •