Reply With QuoteIs your trigger completely out of adjustment. There should be instructions supplied with the gun as to how to set it up. The Alecto can be safely "dry fired", therefore I wold recomend not putting any more pelets in it until it is fixed.
Registered User
Help... my Alecto is not well
When I pump the gun (single pump) it sounds like it vents a noticeable amount of air.
When I fire the gun I only hear a click from the trigger and the pellet is NOT fired.
BUT .... When I release lever and move the upper section of the gun it then FIRES the pellet! Very dangerous.
Any thoughts ?
Thanks
Ian
Biggles
Is your trigger completely out of adjustment. There should be instructions supplied with the gun as to how to set it up. The Alecto can be safely "dry fired", therefore I wold recomend not putting any more pelets in it until it is fixed.
My Club: http://www.wendoverarc.co.uk
Rifles: Air Arms S400 - Air Arms TX200HC - Webley MkII Service Rifle - BSA Imp Model D
Pistols: Webley Seniors - Webley Juniors - Beretta 92FS - Cobra Crossbow
The Posh Knocking Shop Artist Formerly Known as Nocturnal Nick
I'd second checking trigger adjustment as that does sound like the trigger might not be setting or releasing properly, I'd also try running the recommended amount of oil through it as SSPs & MSPs can act wierd if they get a bit dry,
Regards,
Nick
Airgun Repairs, Bespoke Airgun Smithing and Precision Engineering Services
http://www.magic9designltd.com
Registered User
Hi try taking grips off and putting smear of grease on trigger sear, I had similar problem with mine and found out it is a common problem and Webley were getting many returned with this fault until they issued service update.
PM me with your email and I can send you copy that Webley sent me
Registered User
Thanks for the replies chaps.
I'd also thought of returning the trigger to the factory settings as when I'd bought the gun it had been adjusted both pull and weight.
Cheers
Ian
Posting Permissions