Many thanks for the info'.
Many thanks for the info'.
Al
I would imagine if you were using 'dry air' from a scuba tank there wouldn't be much of a problem. That said, I'm not sure how 'dry' this air is and a wipe over with an oily rag has got to be a good idea anyway.
I have a .22, will also put pellet on pellet at 30m
ATB
.22LR CZ452; .22 Hornet CZ527
Tikka T3 Varmint .223; .204 Ruger CZ527 Varmint;
6.5 Creed Bergara B14 HMR
with the FSB it is about 2-3" longer which allows a full length cylinder to be fitted
without fouling the silencer for extra shots
without a silencer fitted it's perfectly usable in the field but very quiet with the extra mod
when I take the shroud off my FSB the barrel has a fine coating of what I believe is lead dust just as you get in the moderator if you strip it .never had any signs of the onset of rust and mine has had a couple of good soakings .(I do strip it and let it dry then oil it) but never found any significant amount of damp under the shroud .I also run mine with a moderator, very quiet.
regards steve
AIR ARMS PROSPORT .177 , MTC VIPER 4x16x50 :cool, HW100T.177, MTC VIPER 10x40. :cool, HW 100 FSB CARBINE .177 MTC viper 10x40 , HW 100 FSB CARBINE .22 MTC viper 10x40 , XS TH78D .22 Hawk varmint 11.