Semi- Auto.

[JD75]

I think I found the reason my Brococks sit in the cabinet.

Crosman 600 a lot quicker to load than the Brococks but a lot dearer to run, 30 -35 shots per CO2 cylinder

These pistols are just great once you have found the right pellet. This one feeds Bisley Practice the best, just load up ten pellets then run the back of your nail down the mag to make sure the pellet are seated one behind each other and not slightly offset. Ten shots down range as fast as you can pull the trigger.

As a side note a lot of people shoot Hobbies in these guns but the are rubbish in this one.

Its accurate as well

[blooregard]

Oh man how I would love one of these.

[magicniner]

I think I found the reason my Brococks sit in the cabinet.

Crosman 600 a lot quicker to load than the Brococks but a lot dearer to run, 30 -35 shots per CO2 cylinder

These pistols are just great once you have found the right pellet. This one feeds Bisley Practice the best, just load up ten pellets then run the back of your nail down the mag to make sure the pellet are seated one behind each other and not slightly offset. Ten shots down range as fast as you can pull the trigger.

As a side note a lot of people shoot Hobbies in these guns but the are rubbish in this one.

Its accurate as well

Convert to bulk fill and the cost of running will plummet
ATB,
Nick

[JD75]

Bulk fill would be the way to go I have all the kit just need an end cap.

It is handy just chucking a couple of cylinders in your pocket and heading for the garden though.

[magicniner]

Bulk fill would be the way to go I have all the kit just need an end cap.

It is handy just chucking a couple of cylinders in your pocket and heading for the garden though.

You can get an end cap with bulk fill quick release fitting and piercer, giving you the option of either
ATB,
Nick

[gedfinn 2]

Convert to bulk fill and the cost of running will plummet
ATB,
Nick

Hi, As Nick say,s , Bulk fill or Hpa !
I have these, A 600 & 400 , With a Bulk fill attachment I imported from the States about 6 years ago ! ( Unused , I shoot )
Pic-http://i101.photobucket.com/albums/m...Picture154.jpg

I think the bulk fill unit was about £28 + postage ?
Also is a Hpa unit I made for this & the 400 , ( I also made a number of extended tubes ) Which fitted both, They were pumped up to 1000psi & gave a very good number of ( High power ) But legal shots on both guns,

These guns are a favourite in Hawaii, Using 1500 Psi, Extended barrels & High power outputs,
As you say A true " Classic " Never to be repeated,
I also made up a number of extended Hpa tubes for the Chinese copy, I have one left,

Cheers, Ged

[Retracted_Yeti]

Where did you buy the 600 bulk fill adaptor from please Ged?

Cheers.

Roy.

[gedfinn 2]

Where did you buy the 600 bulk fill adaptor from please Ged?

Cheers.

Roy.

sorry , I remember, It was 6 years ago, Do a google , it should come up,
Cheers Ged.