Results 1 to 15 of 158

Thread: ProTsc-1911 - Hands On

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Nov 2007
    Location
    Bournemouth
    Posts
    65
    Picked mine up on Friday just been to range and getting lots of light strikes with both Mini Mag and Remington about every second shot!

    Recock hammer and it fired okay

    Any idea

  2. #2
    davederrick's Avatar
    davederrick is offline With our thoughts, we make the world
    Join Date
    Dec 2008
    Location
    Bristol
    Posts
    11,695
    Last weekend my ProTSC had 2 light strikes in about 200 rounds (should have had more ammo ). I got about the same rate in my Ruger 10/22 - so I'm wondering if its ammo & not gun. Can you shoot the same ammo batch in something else to rule that out ?
    "I'm all in favour of keeping dangerous weapons out of the hands of fools. Lets start with typewriters." - Frank Lloyd Wright (1867-1959)

  3. #3
    Join Date
    Nov 2007
    Location
    Bournemouth
    Posts
    65
    Hi Dave

    It was about 3 times every tens shots (ie every mag full) and as said tried two makes of ammo with same result

    Tim
    Last edited by timtriple; 13-11-2011 at 06:41 PM.

  4. #4
    davederrick's Avatar
    davederrick is offline With our thoughts, we make the world
    Join Date
    Dec 2008
    Location
    Bristol
    Posts
    11,695
    I'd suggest stripping it & make sure there are no signs of excess rubbing. The slide will probably bed down after a bit, but it should have a small amount of lube on it.
    "I'm all in favour of keeping dangerous weapons out of the hands of fools. Lets start with typewriters." - Frank Lloyd Wright (1867-1959)

  5. #5
    Join Date
    Nov 2007
    Location
    Bournemouth
    Posts
    65
    Well stripped it gave a good oiling then today not confident in taking it down one of local clubs so drove down to The Tunnel where Richard made me most welcome and tried it. He fired off 30 rounds no problem then left me to get through another 200, fed and fired faultless apart from a couple.

    Richard said just like having a new car with a rattle when you take it back to dealers?

    We think maybe sticking firing pin due to be new and oiling freed it up.

    It was great fun, tried with cheap standard velocity and mini mag, now to work on accuracy

  6. #6
    davederrick's Avatar
    davederrick is offline With our thoughts, we make the world
    Join Date
    Dec 2008
    Location
    Bristol
    Posts
    11,695
    Good-oh !
    "I'm all in favour of keeping dangerous weapons out of the hands of fools. Lets start with typewriters." - Frank Lloyd Wright (1867-1959)

  7. #7
    Join Date
    Apr 2009
    Location
    Bristol
    Posts
    172
    Dave,

    Have you found any issues with your barrel retaining screw loosening up? The thread on my screw completely stripped and we had to use helicoils to fix it. Now that screw has been loctited in.

    What sort of grouping can you get at 25yards? The best ive managed is about 3-4 inches.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •