Tried the sights today, what a difference!

Excellent fun and when really trying single handed could hold a 1 inch group at 25 metres

One note though regarding the screw, yes locking it down as tight as possible stops the barrel moving however we have found over the course of a shoot, it starts to work loose. Needing tightening every 60 rounds or so but no biggy.

One final operational comment, the third "magazine" safety is a P.I.T.A, requiring a magazine in the gun to de-cock it on the range as part of the clearing to put away procedure, clearing as part of minirifle procedure or cleaning it! This safety is part of the original GSG design.

One thing club members have now started doing is disabling this safety, it leaves the gun perfectly safe with the grip and manual safeties intact; all it does is allow the trigger and hammer to operate without a magazine in the gun which in alot of range situations is actually safer! It's a quick 5 minute job and involves removing the main spring housing and taking two bits of metal off it that are under pressure... then replace the housing. Thats it!

Andy