There should be an adaptor fitting in the pistol case which the cylinder screws onto
Can anyone tell me what kind of fitting the Steyr LP air pistol cylinders use for attaching to pumps or diving bottles?
There should be an adaptor fitting in the pistol case which the cylinder screws onto
Steyr LG110 Hunter,AA410 in Gary Cane stock,HC, Steyr LP50,Morini 164ei,Morini CM84e,Anschutz 1417 thumbhole,Rimfire Magic 10/22,Anschutz 1913,Rieder and Lenz Z2,Keppeler 6mmbr
Best Fittings have a good selection.
http://www.bestfittings.co.uk/shopdi...=129&cat=Steyr
I think it is a custom Steyr design though, not an off the shelf thread or adapter style.
HTH
Mark
To answer the original question.
Steyr LP (Pistol) - 232 BAR DIN Male Fill Adaptor. Is the one that comes in the case. It will not fit a 300 Bar bottle as standard.
HTH
Mark
Thanks for the replies. I had a look at the pumps at the club and they seem to have the 232 BAR DIN Male Fill Adaptor on them. However, I want to fill up my BSA superten buddy bottle - and I THINK it has a 1/4" BSP (the default one). Is there an adapter I can use for this? I'm completely new to this air fittings thing so please bear with me!