HW100 Filling advice

[sutty86]

hey guys helped me out alot recentley
need your expertise once again!
so today i went to uttings to buy this
http://www.bestfittings.co.uk/shopexd.asp?id=194
after i explained to the guy , i have a friend who has a pump for his airarms ( not seeing him till tomorrow) and the guy at uttings said this should do the job,

my hw100 has dropped into the yellow and i dont want to use it until i get it back to 200...

i have about a extra £100 to play with ( is it worth upgrading quick fit) or buying the necessary adapters,

and will that adapter fit any pcp pump?

also i dont have any other attachments apart from the rifle....

[ednwales]

That fitting is for screwing into a din diving bottle , i dont think it will fit any pump i have ever seen.
The quickfill conversion would make life a lot easier for you!

[sutty86]

cheers back it goes to uttings then!

so another question is if i do pay out and get a quick fill kit (best fittings)
would i get the adapter to fit my friends pump or is it worth getting my own
if so any preference on model

[captain_gatso]

It's worth getting the inter change adapters, click on and off. Much easier.

[sutty86]

where would i get them from bud

[18 Wheeler]

Best-fittings or Michael Tawn do the quick coupler. I think Tawn's is a couple of Pounds cheaper, have a look at the postage and see which is cheapest all in.

Edit: You will still need the correct adaptor to connect the end of the pump's hose (1/8BSP female) to your detachable rifle cylinder.

[angrybear]

Hi,
I think you want a best fittings starter kit, this has the quick release fitting for the pump hose, and also the other 1/2 of the quick release that screws on to your filling conector you will need 2 of these 1 for you & 1 for your mate & you just plug in which ever one you want, I think the starter kit has all the bits you should need assuming you have the rifle fill probe.
steve

[sutty86]

cheers

i dont have a hw100 probe at the minute surely you can buy these,

[18 Wheeler]

Looks like you would need two items to fill your rifle's cylinder then (click). £37 for the two, ouch. How much is a quick fill conversion/exchange?

I'm not a HW100 owner so check the above.

[sutty86]

already got one of them adapters ,

£75 for the upgrade

[18 Wheeler]

already got one of them adapters ,

£75 for the upgrade

From your posts it looks like you have the brass adaptor as seen in the link I gave. To use it with a normal 1/8" connector you also need the silver adaptor (£22), in the link. The two fit together and then connect to the pump/bottle in the normal way.