strip theoben sirocco

[basa]

hi, i need to strip a sirocco for rebluing,anything tricky i should look out for,any help,or pointers for a strip down guide, much appreciated.

[mallyally]

might seem obvious but dont forget to remove the air first

on the earlier ones the back block is held by a pin but the newer ones are held by a circlip hidden behind an o-ring at the rear / the earlier ones have the same trigger mech as the webly omega

[basa]

might seem obvious but dont forget to remove the air first

on the earlier ones the back block is held by a pin but the newer ones are held by a circlip hidden behind an o-ring at the rear / the earlier ones have the same trigger mech as the webly omega

thanks for the help,Den

[springboy]

Also what ever you do,don't be tempted to cock it whilst out of the stock,it will lock in the cocked position for some strange reason.

[flag 5]

Also if it is the earlier model with the drift out pin, there is a hidden grub screw underneath that needs removing before the pin will shift.

ATB
Jack

[basa]

thanks chaps, its an early one,with pull down button safety catch, in front of trigger guard.