MTC Mamba Lite - Measurement info needed please

[JimmyReno1998]

Gents, does any one have the measurement for the turret clearence (distance that the scope body drops in the centre by the turrets) on the mamba lite, looks about 3 - 3.5mm, any help gratefully received


atb

[18 Wheeler]

Just put some calipers on mine.

The saddle, from flat to flat is 33.1 and is symmetrical top to bottom.

So, 33.1-25.4= 7.7 halve it gives 3.85mm.

Which looks about right by direct measurement, but I can't get the calipers on precisely with the scope in the mounts. That figure is as good as I can do with it mounted, if the dimension is critical I'd recommend a second opinion.

[JimmyReno1998]

ive held the tape measure up to it (about as technical as i can be at this time of night ) and that looks spot on.


thanks again for the help, most appreciated

atb