Results 1 to 10 of 10

Thread: Silencing a skan r32

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 04-10-2011, 02:25 PM #1
    angrybear's Avatar
    angrybear
    angrybear is offline Registered User
    Join Date
    Sep 2010
    Location
    Exeter
    Posts
    35,854
    Sorry are you saying the end plug is 1/2 unf ? if so just screw a male silencer straight on same as an AA510.
    Reply With Quote Reply With Quote
  2. 04-10-2011, 05:19 PM #2
    martyntin
    martyntin is offline Registered User
    Join Date
    Sep 2007
    Location
    wolverhampton west mids
    Posts
    2,418
    Quote Originally Posted by angrybear View Post
    Sorry are you saying the end plug is 1/2 unf ? if so just screw a male silencer straight on same as an AA510.
    No i mean it has an end plug in which i can take out and then i'll need a fitting the same diameter which will fit back in the shroud but with an 1/2 unf thread on it to fit a silencer to. The plug thats in there is held in by a grub screw it does not have a thread on it like a daystate adapter.
    Reply With Quote Reply With Quote
  3. 04-10-2011, 05:31 PM #3
    uk litehammer
    uk litehammer is offline Registered User
    Join Date
    Aug 2008
    Location
    waterlooville, Nr Portsmouth.
    Posts
    5,098
    A friend of mine cut the barrel and shroud all back a few inches, and then fitted a silencer to it.
    Weihrauch B&C HW95K, B&C HW35K, BAM B26-2 venoman custom, QB78 DL custom.
    You ain't so big, you jus' tall, tha's all.
    http://ukchineseairgunforum.myfreeforum.org/index.php
    Reply With Quote Reply With Quote
  4. 04-10-2011, 06:26 PM #4
    martyntin
    martyntin is offline Registered User
    Join Date
    Sep 2007
    Location
    wolverhampton west mids
    Posts
    2,418
    Quote Originally Posted by uk litehammer View Post
    A friend of mine cut the barrel and shroud all back a few inches, and then fitted a silencer to it.
    Looking through old posts i found photos of 1 done like that and although i like the look of it being shorter i have the fitted laser at the end and dont want to cut that off.
    Reply With Quote Reply With Quote
  5. 04-10-2011, 07:30 PM #5
    uk litehammer
    uk litehammer is offline Registered User
    Join Date
    Aug 2008
    Location
    waterlooville, Nr Portsmouth.
    Posts
    5,098
    Quote Originally Posted by martyntin View Post
    I have the fitted laser at the end and dont want to cut that off.
    Umm, yes, I see your point. Shame.
    Weihrauch B&C HW95K, B&C HW35K, BAM B26-2 venoman custom, QB78 DL custom.
    You ain't so big, you jus' tall, tha's all.
    http://ukchineseairgunforum.myfreeforum.org/index.php
    Reply With Quote Reply With Quote
  6. 04-10-2011, 07:58 PM #6
    JJSTEALTH's Avatar
    JJSTEALTH
    JJSTEALTH is offline Registered User
    Join Date
    Dec 2003
    Location
    SHEFFIELD,UK
    Posts
    2,624
    Leupy might do them

    Its a problem I had,but I took the measurments down to a machine shop and they knocked me 2 up for me
    but there should be plenty on here who do them ?

    JASON..
    lots of takedowns
    Reply With Quote Reply With Quote
  7. 04-10-2011, 08:55 PM #7
    Gixxer
    Gixxer is offline Registered User
    Join Date
    Oct 2005
    Location
    Streatham
    Posts
    83

    Skan adaptor

    I had a female adaptor made up which slides down into the shroud. The grub screw holds it in place. Added a male adaptor to the HW and it works well.

    NB the barrel does not meet the adaptor so the pellet is flying free within the shroud before it enters the silencer so the adaptor need to be accuratly made.

    I would add a picture of it but I cant see how to when replying to these posts?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules