HW100 - FSB v Weihrauch Silencer

[oldskoolzzz]

Have to agree, I've owned the FSB and Non FSB HW100's

In standard trim the FSB is not silenced enough looks great and is super pointable but needs the extra silencer which then makes it slightly longer than the HW100K

The HW100 non FSB with the Standard Weihrauch 1/2" silencer works very well and is so much quiter than a FSB in standard trim.

For the best silencing the FSB model with the add on silencer is a mouse fart and very good.

[Dragonboy]

Have to agree, I've owned the FSB and Non FSB HW100's

In standard trim the FSB is not silenced enough looks great and is super pointable but needs the extra silencer which then makes it slightly longer than the HW100K

The HW100 non FSB with the Standard Weihrauch 1/2" silencer works very well and is so much quiter than a FSB in standard trim.

For the best silencing the FSB model with the add on silencer is a mouse fart and very good.

I have both (karbine) too and the FSB is a lot quieter. Wondering whether it worth getting a large spare cylinder for the FSB to increase the shot count?

[Justa1098]

I was shooting my Airwolf next to a guy with an fsb and to be honest I think mine was quieter. I've got the hw100 with a silencer and it's better than the fsb

[isbjorn101]

I have a HW 100K FSB with the A&M cylinder, I fitted a Weihrauch silencer this gives me loads of shots and its silent, well almost, I dont think you would go far wrong.

[Cooperman.22]

I have a HW 100K FSB with the A&M cylinder, I fitted a Weihrauch silencer this gives me loads of shots and its silent, well almost, I dont think you would go far wrong.

Do you have any contact details for A&M?

[Dragonboy]

Do you have any contact details for A&M?

Link :http://www.amcustomgunsmiths.com/

[Cooperman.22]

Link :http://www.amcustomgunsmiths.com/

Nice one, thanks.

[Dodger21]

I have a HW 100K FSB with the A&M cylinder, I fitted a Weihrauch silencer this gives me loads of shots and its silent, well almost, I dont think you would go far wrong.

This is something I have been thinking about but not just fitting the A+M carbine cylinder, rather fitting the full length one, anyone done this on an FSB carbine HW100.

[big s]

Hi I have both and I find the FSB without a silencer is louder than the standard with silencer but add a silencer to the FSB and they are both very quiet must admit I love the FSB carbine .Regarding the A & M cylinder I wanted to fit the full length one to my carbine fsb but it would have been tight on the silencer so spoke to A&M and they have made me a custom length of 300 mm looks great .is lighter so better handling and shot count in .177 is 105 shots before drop in poi from 200 bar fill I believe they are now carrying this as a stock length for the FSB .I havnt had the chance to check the shot count in .22 yet hoping to get that done tomorrow.
Regards Steve

[stublade]

full length cylinder will fit the FSB no problem as the barrel/shroud is slightly longer than a carbine ,
mate of mine did this for a better shot count and it doesn't interfere with silencer ....... which is definately quieter than a standard
HW100 . the extra shroud with a silencer fitted does make a noticable difference