Question for Umarex Colt 1911 owners
Hi!
I'm having some technical problem with my colt, shots are really weak, pellets don't even leave the mag. I've read all the related posts on here and had my colt stripped down completely few times.
Valve is fine, mag indexes correctly, hammer spring is brand new but I don't like the look of that flat metal plate attached to the grip safety that raises between firing pin and hammer as you grip the pistol.
It seems worn and when I cock the hammer, look at the firing pin and press the grip safety it doesn't cover the whole pin. Could this be the issue? I've checked my S&W and in it the plate raises much higher. Should I order a new one?
To give you more precise description, if I cock the hammer and look at the firing pin, so that I align top surface of hammer with the bottom part of firing pin and then press the grip safety i can barely see that plate at all (from that point of view it only covers 1/4 of the height of pin).
Any suggestions?
AA Prosport .22, BSA Lightning XL .177, Beretta 92FS Nickel, CP88, Predom Lucznik wz.70