Results 1 to 3 of 3

Thread: Daisy powerline model 92 Co2 pistol.

  1. #1
    Join Date
    Nov 2011
    Location
    March
    Posts
    69

    Daisy powerline model 92 Co2 pistol.

    Hey there just wondering if anyone out there has a Schematic Drawing or a assembely diagram for a daisy powerline model 92 Co2 (barretta lookalike).

    I would like some reference as I need to pull it apart as some lead from a pellet has got stuck..

    Any help to pull it apart would be appreciated..

    Cheers JJ

  2. #2
    Join Date
    Jan 2012
    Location
    Christchurch
    Posts
    1

    Daisy Powerline Model 92 CO2 Jam

    Hi AussieThunder,

    I have the same gun. Same issue. I pulled the whole thing apart and found 3 squashed pellets amongst the mechanisms.

    The pellets I used were not Daisy. The pellets needed are the Quicksilver flat nose (Nos. 257,557,7557 or 555). I am trying to source some. I think the Quicksilver may have been replaced with the "Precision Max" Flat nose pellets.

    Pulling the gun apart blind (no manual) was ok. I had a few parts go flying. But if you work your way slowly though it and take photos as you go, you should be fine.

    Just reply if you want a step by step process (list).

    Cheers,

    Kiwi

  3. #3
    Join Date
    May 2012
    Location
    Funchal
    Posts
    1

    Daisy Power Line 92 not cocking

    Hello!
    I took apart my airgun but I didnt take any pictures when i was dooing this.Now the gun is working but not cocking.I think there is a problem with a spring.
    Does somebody have any pictures or schematics?
    Thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •