Results 1 to 15 of 39

Thread: MTC viper 10x44

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Feb 2012
    Location
    Fleet
    Posts
    68
    I have a 4-16x44 Mamba lite on my TX and a Viper 10x44 on my R10. They were the other way round and things just weren't quite right. Once I'd swapped them over things just clicked. I really want to have a go at hft but spend most of my time either hunting or on the range. I too found the problem with the milkiness unless there was proper eye alignment but am working on my consistency.
    Daystate Regal .177 Mamba Lite 4-16x44 Belita moderator
    Crosman Ratcatcher, custom breech, QGS mod, 4x32
    Original 52 .177

  2. #2
    Join Date
    Aug 2006
    Location
    Kidderminster
    Posts
    712

    nice

    Bramm the Viper is my main scope 10x44 ,only thing is the paint on the flip ups is not very good , i dont think it as any base coat ,or etching paint on.I took mine off and featherd them with wet and dry paper .Then i re sprayed them with -Holts dupli color auto spray Acrylic formulation on the top reads L146 Satin Black. .Made a cracking job of the flip ups. The black slip over cover rubs the high spots on the scope. [ Dont use it.]

  3. #3
    Join Date
    Feb 2012
    Location
    gateshead
    Posts
    24,405
    after reading this review ive just ordered one to go on my air arms 410

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •