Quote Originally Posted by Smokeless Coal View Post
.
The guns are not fussy about slightly higher or lower loads, but variation is not good if you are trying to improve accuracy.
For my own loads I use the powder dispenser I use for my cartridge reloading, volmetricaly dispensed (17.5gr by vol) but then I double check and weigh each load.
As Smokeless says - it is consistency that you need to work towards (having found a load that approximately suits) . and I also use a powder dispenser and I use vials .....
I'm not as 'accurate' as Smokeless - about each 10th one gets a check - but I do give the vials a 'tap' & eyeball' that they are all the same level of powder..

Cheers

Roy
.