Renewal Imminent - Reccomend Me a BP Pistol (or 2)

[harricook]

So we are now back to the requirement for extra cylinders I feel? Swopping cylinders mid competition is the only way to speed up the event and it's a pragmatic solution to my mind. I'm pretty much hoping that my FEO is going to see it this way. We'll see.

You would need 5 cylinders to shoot a 'conventional' 30 round T&P 1 then ....... hope you have deep pockets

Having a spare (one) cylinder would gain you nothing

...... and as cylinders are only capped on the shooting point - you will still have to have an 'adjust'


I take it - you are itching to be Clint Eastwood in Pale Rider with that quick cylinder swap http://www.youtube.com/watch?v=610YsqZCtHc
Unlike Clint - if carry around capped cylinders - you will get turfed off of most Ranges

Roy
.

[harricook]

This looks a bit of fun !

I like the one handed - in a rocking chair - with a bottle of Tequila in the other had !!

http://www.youtube.com/watch?v=-CyZs...yer_detailpage

Roy

[Buckle]

The first video of Clint - I think only he could pull that off. As you say, I dread to think what trouble a stunt like that would cause at a range!

Roy - As for the second video - words fail me!


DedIDick - thanks for links to the video's. I must admit that is more the kind of thing I was thinking, and not a rocking chair or bottle of tequila in sight! It just needs a mid shoot change of cylinders and we have all the ingredients!!

Many thanks chaps!

[DedIdick]

The first video of Clint - I think only he could pull that off. As you say, I dread to think what trouble a stunt like that would cause at a range!

Roy - As for the second video - words fail me!


DedIDick - thanks for links to the video's. I must admit that is more the kind of thing I was thinking, and not a rocking chair or bottle of tequila in sight! It just needs a mid shoot change of cylinders and we have all the ingredients!!

Many thanks chaps!

Well if you can't find a suitable club down your way there's always room for more cowboys in the Highlands. (another Englishman here or there won't make much difference.)

[Buckle]

Quick update - I have the FEO home visit on Tuesday next week; I'll let you all know how it goes ref the extra cylinders.

[Simon G]

Extra cylinders to tell you the truth are a waste of time. They cost nearly as much as a whole revolver and given the initial "cool" factor and novelty value, you get to a stage where you only ever use one........ the one that's on the gun! On top of which, when it comes to selling that particular revolver with it's cylinders, you won't get anywhere near what you paid for them The police on a whole are a little loathe to give the variations for extra cylinders and an RFD knows this and you'll get pennies on the pound for them....... trust me, that's personal experience!!

"Colt" clones are great for the experience and a sense of history. Remington clones offer advantages such as the sighting plane and the ease of removing the cylinder. But, as generally, both from the same manufacturer, the "quality" is equal.

The Ruger Old Army is a very stout, accurate gun, but rough around the edges because of the casting of parts and lack of finishing. But, a very good gun. One major problem in the UK at the moment though, because Ruger stopped production of the Old Army after several decades, people seem to think that this gives an instant rise in the value!! Most people seem to be asking the price that the ROA was when it was new! I've seen one or two where the owners were wanting 900 quid! FFS!

Ruger dropped the Old Army because they made nearly 4 million of them and they don't wear out if looked after properly. Unfortunately, not many people in the UK understand that...

Euroarms made a fairly decent replica of the Rogers & Spencer, but again, standard of finish and the quality of some internal parts were questionable as far as quality was concerned. (Mine locked up completely after only firing 8 rounds from new!) The gun was scrapped by the importers and I was refunded, but I'd never buy another Euroarms!) That said, I believe they are now bust.....

The best B/P revolvers on the market today are the Remington and Rogers & Spencer made by Pedersoli and the FB History revolvers. These are the guns that they win world cahmpionship medals with. As close as you can get to a custom B/P revolver, but, they do retail at well over a grand! That said, that doesn't really make them expensive when you see second-hand Ruger prices! Unfortunately, the Pedersoli and FB revolvers are rarely seen on the second-hand market.

[majex45]

If you only enter the MLAGB competitions, they are all timed to account for only one cylinder.
If you shoot Timed & Precision and Multi-Target (PP1 and SPB as was) or America Match or practically any other competitions then an extra cylinder (or 2 if you can afford it) is useful as you can complete a stage of ten or twelve rounds, retire to the reloading area while the next detail shoots and then swap over again. This gets maximum utilization of the range time available.
Another alternative (at a higher cost) is nitro muzzle loaders (either converted LBP or specially made). These take as long to load as muzzle loaders but generally are more indoor range friendly as they don't produce as much smoke. They are listed as a muzzle loader on your ticket so you don't have to specify Nitro versus black or substitute.
Finding the right caps (number) is essential as BP revolvers can be very unreliable if you use the wrong ones, that's why I sold mine. Bang...click...bang...bang...click...bang etc really lowers your T&P scores.