PPU brass

[deerhunter1978]

Hi Guys
Any one got any views on PPU brass quality useability etc etc.

Steve

[Northern Monkey]

Hi Guys
Any one got any views on PPU brass quality useability etc etc.

Steve

I've used it for .303.

No problems and seems to be reasonably good. No where near Lapua quality, obviously, but a good budget case for the most part.

[Sako7mm]

Very good indeed for the price.
I was amazed at the lack of weight variation in the first batch of PPU 243 brass I bought. I have necked it up to 25 calibre and fireformed it for my 25-243AI wildcat . It is holding up very well.

[Simon_S]

Its ok for the cash you get it for, i use ppu 357mag case thay where £15 for 100 and i have used ppu 308win case thay where a job lot i got off hear think i paid £10 for 200 there ok. I do have Lapua case in 308win there the best but there £50 for 100, would just use these for Sunday best. Also better using cheap 357 case in a lever gun if you loose a case no big deal.

[Bomag]

I use it in 223 and find it easier to use than other mid-priced brass. I dont buy the brass just factory ammo and fire then reload.

[Hornet 6]

I like it, works well for me in .22H, .223 & .222

Neil.

[DaveK]

I've used it for .303.

No where near Lapua quality,

?? Prvi make the machinery that Lapua use. What's the difference that you've found?

[deerhunter1978]

Hi Guys
Ive been having a few issues with the new Privi PPU .22 Hornet Brass In My Anschutz 54 Match Heavy Barrel Target 1432 ESt , when I put any other round in and feed the bolt the bolt closes OK on to the bullet I have tried Sellier Bellot , Winchester, Remington they all chamber OK , when I do the Privi PPU they are tight to close the bolt on , I use an RCBS neck die to size my reloads.

The Rifle is very very accurate and shoots extremely well one hole groups !

Wondered if anyone had any issues or had any Ideas, forgot to say that I only neck size my reloads , used N110 7.5Grns with 45 Hornady soft points.

Steve

[tony h]

Hi Guys
Ive been having a few issues with the new Privi PPU .22 Hornet Brass In My Anschutz 54 Match Heavy Barrel Target 1432 ESt , when I put any other round in and feed the bolt the bolt closes OK on to the bullet I have tried Sellier Bellot , Winchester, Remington they all chamber OK , when I do the Privi PPU they are tight to close the bolt on , I use an RCBS neck die to size my reloads.

The Rifle is very very accurate and shoots extremely well one hole groups !

Wondered if anyone had any issues or had any Ideas, forgot to say that I only neck size my reloads , used N110 7.5Grns with 45 Hornady soft points.

Steve

just sounds like the shoulders need knocking back a thou.....

[junkyard dog]

?? Prvi make the machinery that Lapua use. What's the difference that you've found?

Wot he said